20 Most Recent
JBL ONSTAGE Docking Station for iPod - Page 7 Questions & Answers
How to pair JBL with iPad
Open settings on iPad Bluetooth scan for devices make iPad discoverable press and hold power button on jbl untill red and blue light flash look on iPad see your jbl press and done give that a try or try reverting to instructions if you still can't connect with iPad troubleshoot by trying to connect to Android if it connects to Android then retry with iPad and messing with Bluetooth settings or iPad may need an update check in settings general
6/21/2018 4:29:25 PM •
JBL Audio...
•
Answered
on Jun 21, 2018
Where can I find the fuse inside the jbl eon 610?
I doubt it's the fuse, since a blown fuse would cut the power off completely.
It's more likely to be a bad capacitor that's causing a power supply problem so the amp can't get enough power to amplify the signal.
4/26/2018 9:44:52 PM •
JBL Audio...
•
Answered
on Apr 26, 2018
No sound output from my JBL Cinema SB400, tried Bluetooth and HDMI also optical. It was fine yesterday and I turn it on and just no sound what so ever. Can anyone help?
Does the power light come on? If not, check the power cord and power outlet on the wall. Maybe plug in a table lamp to the wall power outlet to make sure the outlet is working. If the power light is on, check the Mute button on your JBL remote control. Also check the Mute button on your TV if sound and picture go through the TV first.
We had a Harman Kardon soundbar (model SB30) made by the same company as your JBL. It worked great for a few months. Then there were a couple of funny high-pitched sounds that stopped when we turned the soundbar off and back on. Then a day or two later we truned on the soundbar and it was completely dead - no sound at all. Harmon/JBL replaced the soundbar under warranty with a refurbished one which lasted about two weeks and dies the same as the first one. Finally, they replaced the second one with a higher model (the SB35) which is still working, although it occasionally makes a rapid clicking noise for a moment here & there.
3/27/2018 5:03:51 PM •
JBL Audio...
•
Answered
on Mar 27, 2018
JBL Encounter Speakers Suddenly Lost Volume While Listening to Music.
Did you check the continuity of the line? If the end line (Jack) is pulled out several times over, the stress on the wires causes some wires to fray or breakaway. A pattern of increased resistance results and thus lower volume to the speakers. You may need to cut the end, replace the jacks.
2/19/2018 5:50:04 AM •
JBL Audio...
•
Answered
on Feb 19, 2018
Not finding what you are looking for?