Roland Juno-D - Page 5 - Answered Questions & Fixed issues

Good day Your best bet would be to search on Amazon or any other local swops website in your area. Kind Regards

Unfortunatly the impact from a fall can lead to numerous problems ranging from a broken fuse to a disloged power supply to a cracked board. I'd suggest taking it into your nearest Roland authourized service center to get it checked out. If you're not trained in electronics you can do more harm than good poking around inside the amp. https://www.roland.com/us/support/service_repair/service_centers

http://www.fixya.com/support/t22380715-fix_roland_js_8_eband_plug_in http://www.fixya.com/support/t22380715-fix_roland_js_8_eband_plug_in

SPD-SX: Auto Off - Roland - Support - Knowledge Base - Knowledge ...

https://www.roland.com/us/support/knowledge_base/201970679/

Auto Off is a feature that shuts down the SPD-SX automatically when it hasn't been used for 4 hours. This can be helpful if you've mistakenly left the SPD-SX's ... Missing: js8 ‎' ‎Must include: ‎js8

Open up the Roland G-70 and check if all the connectors and flatcables are well seated. Check also if the power supply is working as supposed to.

The wires were probably broken or disconnected during the move.

I got this free Pdf manual from an online store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the all the times I fixed the chipper in these 4 years

Possible IC chip shorted or failure on the fader board.

https://www.roland.com/global/products/fr-4x/ https://www.roland.com/us/support/knowledge_base/203033135/ https://www.long-mcquade.com/74269/Band---Orchestral/Accordions/Roland/V-Accordion---Red.htm https://www.gear4music.com/Woodwind-Brass-Strings/Roland-FR-4X-V-Accordion-with-Keyboard-Black/1PBQ https://www.gumtree.com.au/s-nsw/keyboard+piano+roland/k0l3008839

https://www.roland.com/uk/products/juno-ds/ https://www.sweetwater.com/store/detail/JunoDS61--roland-juno-ds61-61-key-synthesizer/reviews https://www.sweetwater.com/store/detail/JunoDS61--roland-juno-ds61-61-key-synthesizer/reviews https://www.rolandus.com/blog/tag/juno-di/ https://www.amazon.com/Roland-Lightweight-Weighted-action-Keyboard-JUNO-DS61/dp/B016NUAL5Y

https://medias.audiofanzine.com/files/fp-2-om-478648.pdf https://static.roland.com/assets/media/pdf/FP-90_e01_W.pdf http://www.pianorent.dk/digitalpiano/roland-f140r/dokumenter/RP401R_F-130R.pdf http://www.rosaudioservice.ru/uploads/attachments/pdf/owner-s-manual_FP-50_OM.pdf

Static is usually the result of a bad connection. I suspect there is a bad solder joint. If you are electronically inclined, use a listening device or oscilloscope and connect it to the volume control terminals if it is not present on the input to the volume control then it is the volume control that is bad which happens in old equipment best solution is replacing the volume control or you can try cleaning it with an aerosol product for this purpose.

If it hums when running on battery power, either your cable from your instrument needs repair, or it's the wrong type (unshielded or TRS) or your instrument has a problem, or you're in an area that has too much RF or electromagnetic interference.

All rechargeable batteries have a lifespan and they may be nearing their end. It may also be that t your charger isn't putting out what it used to. Best to take it in for repair so they can determine the cause of the problem.

lucky you that wants to get burnt disabling a safety feature is NOT the way to go but fixing the fault that wants you to do so is the way to go

Check eBay,you find a nice one there..

This problem is on of overheating and will need to be taken in the repair shop to correct.

the article you shared is technical & difficult to understand but working for music is quite good & interesting. when ever igt busy with it best website to get essays i contact & manage things easily best website for essays

See if you can determine where and get to the actual sticky spot. Often I have found that things like this are easy to clean or lubricate as soon as you see the actual place that is rubbing... Looks like it may be tricky to see the lever, but a mirror may help. clean it (even with "goof-off" or something) Then a little wd-40 (on a q-tip if you don't want to make a mess) or mineral oil will probably help. Good Luck

Well first off put it back where it was originally. if that doesn't fix it you've probabple blown the transformer in the power supply and it will needt o be replaced.