One For All URC-7800 Remote Control - Answered Questions & Fixed issues

You can't control its Blu-ray region with a universal remote control. Can adjust its DVD region, with a URC. 0029,0021,0274,0279,0270 are the codes to check. If you wish to get more codes and other details, http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/

Blu-Ray players cannot be set-up with any universal remote controls. It must have its original one.

1. Turn on the component you wish to control
2. Press the button for the device you want to program.
3. Press and hold the [SETUP] button until the LED flashes twice.
4. Enter the code 9-9-1. The LED should flash twice.
5. Alternate between pressing the [POWER] key and the device key until your device shuts off, or use [PLAY] for VCR, LD, CD and DVD players. This may take some time as there are hundreds of codes.
6. When your device turns off, press the [SETUP] button to save. After you have configured your devices using the Code Search feature, you might need to find out which code was assigned.
   
   
7. Press the button for the device you want to program.
8. Press and hold the [SETUP] button until the LED flashes twice.
9. Enter the code 9-9-0.
10. Press the numeric button [1] and count the number of times the LED blinks. This represents the first digit of the four digit code. Press [2] for the second digit, [3] for the third digit and [4] for the fourth. If the LED does not blink, the number is 0.

I’m happy to help further over the phone at https://www.6ya.com/expert/al_e83b1941f9c0f302

Try 0054, 0030, and 0171.

HI,

The code for RUC 7800 remote to programme with sony TV is 0000

Thanx

If you have a URC-7800 the codes 0477, 0008, 0017 should work for the scientific atlanta cable box.

You can follow the two methods I have explained below:


AUTO SEARCH FOR CODE
To program your remote in Auto Search Mode, first turn on the device you wish to program and point the remote toward it.

Then press and hold the SET and POWER buttons until the LED turns on.

Then press the device key ( CATV or RCVR) .

The LED will flash once.

Then press the CH+ button.

Then hold the POWER button for about two seconds until the LED turns on.
Release the POWER button and the LED will flash slowly. Your remote is searching through all of the codes. Continue to point the remote at the device until your device responds.
If your device turns off, turn it back on and press the CH+ button on your remote. Then press the POWER button and CH+ button alternately until the device turns off and the code is correct. Press the ENTER button to confirm and store the code. The LED will flash three times and then turn off.


If the above is not helpful then try manually searching for code:

First, press the device button on your remote.

Then press and hold the SET button. While holding the SET button, press 1 to find the first digit, 2 to find the second digit or 3 to find the third digit.

The LED flashing time will stand for each code number. If it doesn’t flash, it will stand for zero.

For example, the TV code you are trying to find is 102.

Press the SET button and 1. The LED will flash one time.

Press the SET button and 2. The LED will not flash.

Press the SET button and 3. The LED will flash two times.

Press the ENTER button to confirm and store the code. The LED will flash three times and then turn off.

Hope it helps to find your code. Thank you for using fixya!

Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC7800
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(For low price replacement remotes visit www.sparky-uk.com)

I tried all the codes on my remote and none has worked on this remote tsrc411. Help

Question edited to a lot more clarity and fix your broken Spacebar! https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote 0872 is the code

Daenyx DVD universal remote control codes (4 digit)

eliztech.com https://www.eliztech.com > remotes > codelists > daen... Mixed Daenyx DVD codes from a single brand of universal remote control. Highlight / Show only codes for: OneForAll x. Sort codes Show color. 4 digit codes:. ..

????????? TV WOFAR SARKIT

To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/. Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

Contact remote manufacture for the codes

TRY ASKING GOOGLE

https://www.oneforall-canada.ca/en-ca/universal-remotes/urc-7935-streamer-remote/support/digital-manuals/getting-started/key-descriptions

'OK' confirms selection

Key descriptions ' One For All

https://www.oneforall-canada.ca > en-ca > getting-started 2 TV - Input used to select the correct HDMI input on your TV. ... 11 VOLUME UP, DOWN and MUTE - Volume Control - Can be reassigned to TV or Sound Bar / AV ... Missing: white ‎center

• Universal Remotes - oneforall-canada.ca

  https://www.oneforall-canada.ca > en-ca > support > uni... Need help with your remote? Browse through detailed support information like: manuals, FAQs and videos.

Support ' One For All

https://www.oneforall.com > support Universal Remotes. Click on the button below to find a setup code for your devices, or browse through detailed support information like: manuals, ...

• SimpleSet and Learning Feature ' One For All

  https://www.oneforall.com > explore > simpleset-and-le... Step 3: Finally, hold down the digit on the remote for your brand & device (e.g. 6 for Samsung TV). As soon as the device turns off, release the key and the ...

Troubleshooting the One-For-All URC10820 Universal Remote

https://voxxintl.zendesk.com > en-us > articles > 22543... Nov. 23, 2016 - Solution: LED (red light) does not blink when you press a key on the URC10820,URC10820B00. Replace batteries with four new ...

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name of your device in its search box at the right column of the display window. It will help you to find the details easily. https://homenol.blogspot.com/ https://elektrotricks.blogspot.com/ https://remotesearch.blogspot.com/ https://electrohelponline.blogspot.com/..

GOOGLE CODE LIST BY MAKE OF T.V.

a UNIVERAL REMOTE is not able to broadcast the specific signals that are required to perform a specific action on given brand of television. You will have to find a remote control for that specific television.

https://www.google.com/search?q=codes+for+a+Magnavox+TV+DVD+combo&oq=codes+for+a+Magnavox+TV+DVD+combo&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

Your One for All remote control may not have a DVD ejection function.