20 Most Recent Vtech Digital Cordless Telephone VT-2568 - Page 2 Questions & Answers

The instructions begin on page 24 of the manual at
http://vt.vtp-media.com/ecp/documents/product_Product/851/UserManual/2708/v2568_manual_bkm2.pdf


http://vt.vtp-media.com/ecp/documents/product_Product/
851/UserManual/2708/v2568_manual_bkm2.pdf

To be able to register your replacement handset, you must de-register all the handsets from the VT2656 base unit.

Follow the steps below to de-register your handset(s) from the VT2656 base:

1. Take out the handset that sits on the base.
2. Unplug power from the base.
3. Hold down PAGE while reconnecting power. When the In Use light blinks, release the PAGE key.
4. Hold down PAGE key for 5 seconds. When the In Use light begins to flash, release the PAGE key.
5. The handset charging light will blink 5 times. Within 5 seconds from when it stops blinking, press PAGE once.

You must register the handset(s) by following the steps below:

1. After charging the handset, remove it from the cradle, the LCD display will read "SEARCHING FOR BASE".
2. Press "NEW" and then enter the 15-digit Base ID code, located on the underside of the VT2656 base unit.
3. Press "OK". The handset will display "PLEASE WAIT!!".
4. Wait approximately 15 seconds. The handset will display "FOUND BASE". If the handset displays "BASE BUSY TRY LATER", this indicates that the system is in use. Wait until the base unit is in the idle (on hook) mode and repeat steps 2-4.

parallel i believe refers to the ability to use multiple handsets on one line and one call. This phone has the ability to isolate a telephone call so that only the original answering handset can tune into the conversation. If you only have one of these models then this setting has no real function.

Pls Rate This Post :D

"No line" usually means that it is having trouble connecting to your telephone cable. Make sure to see that it is connected to the phone and to the wall. If it is, your cable might be faulty and you might want to replace it.

Thanks

Here you go http://www.retrevo.com/support/Vtech-vt2960-Telephones-manual/id/470bh541/t/2/

Please check the line input at the base, if the cord is damaged or the line has no dial tone, you'll receive that message in all headsets, you could test by connecting any basic wired phone to the same cord, if there's dial tone maybe you have a defective handsets base.

The main unit with the answering machine needs to be plugged into and outlet and also plugged into a working phone jack. The other units just plug into an outlet and speak to the main unit wirelessly. Make sure the main unit is plugged into a phone jack.

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Thanks for using FixYa.

Hi,

You can download and print the complete instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader.

Thanks for using FixYa.

Attention:please read all the way through!A part like that is rarely available at stores and normally requires contacting the maker.First of all,you could try one thing.Some electronics occassionally 'lock up'.If you unplug it for a minute then plug it back in,that usually fixes things.Some technology huh?If it does not work for you please let me know.I contacted V-tech and the power adapter is no longer available.However,they gave me some information about you buying a new unit online which they will give you a 15% discount on a new one plus free S&H.The newest,best technology is DECT 6.0. A 2 handset unit w/ answer is about $45(about $39 after discount),and a 3 handset unit w/answer is about $60(about $51 after discount).The model number is 6229-2 for 2 unit,6229-3 for 3 unit. Use the promotional code 9975804 for your discount and free shipping.
Good luck! Greg

Hi,

Thanks for using FixYa.

Kindly let us know the complete model number.

Press the function button once.Use the directional button to cycle through the options.Once you get to initial set or set rings option,press left or right to set the number the press the off button.If your option is initial set,press right,you have to scroll down to set answer machine options press right and set ring tones,I think up and down on directional pad.Good luck!

Hi there,From answering your telephone when you are busy or away, to broadcasting a generic message to callers, an answering machine is a key part of your home or office phone system. When the device is working properly, it not only records and playbacks messages, but also informs you of the date and time of the call. If your answering machine is not recording messages, displaying an error code or is presenting another problem, you can reset the device and restore it to a working state.

http://www.vtechphones.com/vtechui/support/manual.cfm?manualID=21705

Click Here to go to user manual. Select correct model number for you

5 is the answer./

http://www.vtechphones.com/vtechui/support/manual_list.cfm

You can download a manual from http://www.vtechphones.com/vtechui/support/manual_list.cfm