20 Most Recent Clymer Mercury/Mariner 2.5-60 HP Two-Stroke Outboards Includes Jet Drive Models 1994-1997 - Page 7 Questions & Answers

0helpful
1answer

Evinrude motor - cant read the top number (model) but the serial number is G03141734, any info would be appreciated

they didnt make a 115 in 1994 https://www.marineengine.com/manuals/evinrude/ https://goneoutdoors.com/decode-evinrude-outboard-serial-numbers-7610722.html
5/5/2022 1:01:17 PM • Boating • Answered on May 05, 2022
0helpful
1answer

My simrad evo2 screen flashes back and forth bright it does not stay at a constant brightness.

gps nav needs service or battery weak. or needs reset. RTM read the manual for that.
4/1/2022 2:53:55 PM • Boating • Answered on Apr 01, 2022
0helpful
4answers

Jackson kayak hull repair

Crosslink = good luck Linear plastic is simple: cut a sliver from your cockpit and try to weld it back with a heat gun, soldering iron or old skiwax iron, do not use open flame as this will produce soot. There are many sources of linear plastic, use the above system to ensure compatibility of plastics. When welding try to melt the two plastics together, I normally spin the plastic "welding rod" thereby mixing old and new material into a good composite of both. Video is my son's Rockstar, we welded a bow protector because Jackson linear plastics cannot compare to any other boats I have paddled in thirty years. Jackson's paddle well and my son loves his boat, but as his technician it sucks. Google "keelguard" this product may help someone. https://www.keelguard.com/keelguard.html BTW an old iron works great on linears to smooth out cuts or nicks. Boiling hot water will help pop dents out!
3/30/2022 8:54:11 AM • Boating • Answered on Mar 30, 2022
0helpful
1answer

What is it like to go kayaking on Monterey Bay?

Are you interesting in kayaking in Monterey? The gentle, cool waters of the bay make it the ideal place for newcomers or those looking to develop their experiences. You can either rent a kayak to go on your own or join a guided tour. If this is your first time, I suggest that you go with a guide or take a short practice session to learn a few methods before you set out on your own. To know about kayaking you may check this link Best Rated Kayaks in 2018 Tested Reviewed by Expert Anglers
3/30/2022 8:19:58 AM • Boating • Answered on Mar 30, 2022
0helpful
3answers

What equipments are used in kayaking?

It was depends on which activities you want to use with your.Its may fishing, touring,sporting etc.Considering all these things, I select these materials
  • Kayak Spray Skirts.
  • Life Jackets.
  • Paddles.
  • Helmets.
  • Life Jackets.
  • Recreational Paddles.
  • Touring Paddles.
  • Dry Boxes.
  • Dry Bags.
  • Gear Bags.
  • Phone Dry Bags.
  • Travel Bags.
  • Kayak Storage.
  • Rudders, Kits & Parts.
  • Kayak Sails.
  • Kayak Anchors & Anchor Systems.
  • Rod Holders.
  • Kayak Carts.
  • Kayak Trailers
  • Navigation.
  • Pumps, Floats, Leashes & Sponges.
  • Dry Wear
  • Layering.
Want to know more details check here Best Fishing Kayak Under 400 Top 5 Selections For 2018
3/30/2022 8:09:24 AM • Boating • Answered on Mar 30, 2022
0helpful
3answers

What should you bring when you go kayaking?

Lots of things needed when you go for kayaking. It depends on you and where you want to kayak. If you go for fishing you need fishing types accessory but if you go for tour or adventures you need that types of thing. Considering these things, I will select some materials that you need. They are those : Dry Bags and Dry Box ,Bilge Pump or Sponge ,Lightweight Tent ,Synthetic Sleeping Bag,Life Jacket,Water Filter or Iodine Tablets,Sunscreen,Watch,Paddle float,Compass (that floats),Towline,Maps and charts in waterproof case,Lip balm (SPF 15+),Insect repellent (as needed),Water in bottles or reservoirs-shielding hat,GPS (loaded with map files,Emergency flares or strobe,Two-way radios (1 in lead, 1 in sweep boat). To know more about kayak you may visit here Best Inflatable Kayaks in 2018 List of The Top Selling Models
3/30/2022 7:19:02 AM • Boating • Answered on Mar 30, 2022
0helpful
1answer

At present I have a Xantrex Heart inverter/charger mod # 81 2511 12 {207} I am looking to replace it but i dont know the wattage

Xantrex Freedom Marine 25, Off Grid Inverter, 2500 Watts, 12 Volt, Portable Manufacturer Part Number: 81-2511-12 Detailed Description: AC Power Inverter with High Surge Capability, 3-Stage Charger.
  • MSW AC power inverter with high surge capability
  • Automatic 3-stage battery charger
  • Temperature compensation with equalization stage provides optimal charging of deep cycle batteries
  • Built-in transfer switch automatically transfers between inverter power and incoming AC power
  • Multiple battery bank charging from the built in 15 A echo~charge
  • Power sharing prevents source AC input circuit breaker from tripping
  • Customized settings can be programmed with the Freedom Basic Remote or Link panels
  • Aluminum chassis ideal for marine environment
  • Includes battery temperature sensor
  • 30 month warranty
Protection Features
  • Over voltage and under voltage protection
  • Over-temperature protection
  • Overload protection
  • Short circuit protection
3/21/2022 10:59:51 PM • Boating • Answered on Mar 21, 2022
0helpful
1answer

What is the input voltage range for an everstart 750 watt inverter

Check your connections. 750W is about 7 amp at 110 V. It's going to try to draw 80 amps from the battery! Recommend you check voltage with a multi-meter - I made up a set of probes for my meter with needle points so I can go right through the insulation of the wire and check voltages. Looked at an on-line photo of the unit, and the clips (and wires) look light for carrying 80 amps.
12/6/2021 10:05:08 AM • Boating • Answered on Dec 06, 2021
0helpful
1answer

To Bill Boyd, the motor is a 4 stroke 4 horsepower outboard motor. Also what grade unleaded gas should I use?

I always use ethanol FREE gas.. 87 octane should be fine!!
11/12/2021 5:34:58 PM • Boating • Answered on Nov 12, 2021
0helpful
1answer

2008 Mercury 4 stroke stops running and or idles rough. Then will run fine for periods

Sounds like its time for carb cleaning & setting.. by a Professional!!
11/12/2021 5:29:59 PM • Boating • Answered on Nov 12, 2021
0helpful
1answer

How to set the points on a 6 horse outboard motor

.014" gap.
11/12/2021 5:28:10 PM • Boating • Answered on Nov 12, 2021
0helpful
1answer

What are the dimensions of 11060936690?

What? Need MUCH MORE info!! Details please!!
11/12/2021 5:25:20 PM • Boating • Answered on Nov 12, 2021
0helpful
1answer

Just put in a new CDM. Kill switch and bilge not working. It starts with the start button but won't kill the engine.

Take it to a Professional mechanic and have them fix what you did!!!
11/12/2021 5:20:57 PM • Boating • Answered on Nov 12, 2021
0helpful
1answer

Minnkota trolling motor, directional arrow won't work but foot pedal does?

I, personally, never look at the arrow.. run be "feel" ..when you are running the boat from the trolling motor, you can sense which way the boat is going. Run by "feel" and you will become a much better trolling motor operator.. and a BETTER Fisherperson!!! This way you NEVER have to look down just to see where you are going...this is what really amateur fisherman do!! PRACTICE running the trolling motor TOO!!
11/12/2021 5:19:43 PM • Boating • Answered on Nov 12, 2021
0helpful
1answer

250 optimax has trouble coming out of the hole when it is run, then shut off to fish. Push the throttle down, runs up to 2200 rpm, bring the throttle back to idle then push down again, it goes

Sounds like you may have throttle box/throttle cable issues.. a Professional mechanic can fix it!
11/12/2021 5:11:35 PM • Boating • Answered on Nov 12, 2021
0helpful
1answer

I have a 15 horse mariner, what is the mixture for gas and oil for this motor.

32:1 should be ok...
11/12/2021 5:10:20 PM • Boating • Answered on Nov 12, 2021
Not finding what you are looking for?
Clymer Mercury/Mariner 2.5-60 HP Two-Stroke Outboards Includes Jet Drive Models 1994-1997 Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Clymer Boating Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66824 Answers

johnny bonacci
johnny bonacci

Level 2 Expert

325 Answers

Are you a Clymer Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Clymer Boating

  • Clymer Boating

Most Popular Question

top up lubricating oil in hydraulics

  • Boating
Loading...