20 Most Recent
Hayward SAND FILTER, PRO SERIES - Page 6 Questions & Answers
Can you rebuild a 711 Hayward
all the filter heads can be rebuilt. there are no kits for this that i know of but the individual parts can be ordered in. i usually just replace the entire head for $400
I need to know what
FILTER is the valve position when the system is in the normal filtering mode.
When you backwash the filter you first need to turn off the pump, place in BACKWASH position, and run the motor for 45 seconds (or until the backwash water is clear). Turn off pump and run in the FILTER position for 15 seconds. Repeat twice more.
The RINSE position is to clear any dirt in initial start-up cleaning, plus resetting
filter bed after backwashing.
The WASTE position is for
vacuuming directly to waste, lowering pool level, or draining the pool.
The CLOSED position is for shutting off all flow through the valve.
The RECIRCULATE position allows water to flow from the pump through the valve and directly to the pool.
You will probably only to use the FILTER, BACKWASH and maybe the RINSE valve position. The RINSE position is not as important as indicated by the fact that many backwash valves don't have a RINSE position.
I hope this helps.
Not finding what you are looking for?