20 Most Recent Pride Mobility Products Casual CL30KD Lift Chair Chestnut - Page 2 Questions & Answers

the motor will automatically brake the scooter to stopped and keep it locked there until it is running again or put manually in neutral.

Usually when things electrical get wet they fail.

Try this site: https://shoprider.com/resources/user-manuals

From a pure physics standpoint... The energy to climb a hill... be it from the steep side or the gentle sloping side is the same... It is just easier on your heart and joints to take the gentle slope... (assuming you have the time). ERGO: If treating the scooter like a QUEEN is your goal... DEFINITELY GO SLOW. Tat way you will have no idea if it has any weak spots when you need it to go fast (and you will). I'm old... I don't have TIME to waste! Carnac the Magnificent

hi,

Sounds to me like the worm drive is slipping , this can happen when the worm drive small bearing is worn,

If you do take it a part , please take great care, the shaft from the motor will have a worm drive, two bearings on the worm drive,

Try to move the shaft within the bearings, I paid £10 for replacement bearings.

Please give me a update.

Regards
GeWiz.

Maybe too late for this advice but it is important to take a detailed photograph of the wireing before unplugging anything.

I'd recommend a dental pick.

Hi not much info is there a red LED & green LED on charger...or is there a red LED & orange led on ?? Bit more info would help cheers

Hi check the main circuit breaker c photo push the white button in to c if it has tripped open cheers

Yes a technician with a programmer can set the control very slow so it is limited on how fast it can go. Otherwise the joystick is meant to be adjustable, so setting it to one speed only not possible. I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

hi Linda, can you please tell me what model pride this is ? Regards Rob

Candy Apple paint is extremely hard to patch repair. It has a base coat of silver or gold and then multi coats of the candy apple over the top. You can get a paint that is meant to be a touch up for candy apple but you never end up with the same shade of color. Most of the time it will come out dark blood red anywhere that it over laps the old paint. I would contact Pride as they may use a paint that does not require a base coat.

there is sometimes a cable that u can adjust at the motor break.

Check you're freewheel lever if its in freewheel u have to take the key out engage lever & put key back in. Also if u have left the key on for more than twenty minutes the circuit will shut down only the light will work. take key out for 5 minutes then put it back it should work unless it's another problem good luck

Bearing probably.

Battery connections?

Your jazzy chair should have 2 levers. There is a lever for each wheel. if the other wheel does not have the lever, then you are missing the lever that would release the wheel. Have a local tech look at it and they may be able to get the parts needed to release the other wheel.

At the bottom of the two metal posts you should see a metal piece that you press in and the headrest should slide upwards...