Top 20 Invacare Supply Group Invacare Pronto M51 Power Wheelchair - Blue - Power wheelchair - Page 4 Questions & Answers

Question edited for clarity, but it helps to know WHAT the error message or code is? Try a power reset first * to reset it: Plug your straightener in and hold the power button for about 20 seconds to reset it. Or contact them direct for Support, Warranty or Repair.

Frequently Asked Questions

CROC® Hair Professional https://crocofficial.com > pages > frequently-asked-questi... Most Croc flat irons can be used up to 240v. However, our older units did not have this feature, and we advise that you call our Customer Service Department ... ..

A Seal or a Plug? Seals They should be carefully pressed into place flat and square using a hydraulic press. Here is your Service Manual

Pronto® M71™

Invacare Canada http://www.invacare.ca > doc_files PDF Dec 13, 2006 - Replace the motor end cap and secure using the two end cap screws. NOTE: Repeat STEPS 1-12 for the opposite motor. 11. If new motor brush ... ..

Find the owner's manual on the link below https://www.pridemobility.com/pdf/owners_manuals/us_scooter/us_sport_rider_om.pdf

Grahame, this is posted in cars and trucks and the only mini in a name I encounter there is a Cooper. Otherwise, I see Mini Pro associated with DRONES. It you are having a problem with a drone, it could be due to a loose component or the motor. Your best shot would be to check with a relevant service center nearest you. You would need to google the whole name of the device plus service center, very likely. I just am not sure what the device is. Originally, I thought it was a question about a scooter! Maybe repost with information identifying the item.

Question edited for clarity to what I think you meant to say. Maker Support. It would be useful if they had an online manual. The freewheel lever is normally below the seat near the driven wheels https://www.mobilitypower.co.uk/product/jh500/ Check out page 12 of this maker's manual https://www.mobilityscootersplus.com/downloads/1552513072freeridercityranger6and8ownersmanual.pdf ..

The most likely reason is that you lost 6 pounds in hospital due to the wonderful food. :>D There are a couple of things you can do. Take the scale to your doctor surgery and compare your scale against theirs. Take the scale to the supermarket and put 2 x 10lb bags of flour on it or 7 x bags of 2lb sugar bags. They can recalibrate

Customer Support

Homedics https://www.homedics.com > customer-support Homedics Customer Support section includes our contact information, downloadable instruction books, FAQs, how-to videos and more. Get help today. ‎Parts and Accessories · ‎2-Year Limited Warranty · ‎1-Year Limited Warranty ..

'power pack'? Do you mean the battery or the battery charger? Depending on the make, some are 12 volts, but some are 24 volts.And by 'run an 8 amp mobility charger for 8 hours' is also ambiguous. Do you want a charger that will charge in 8 hours, or do you want batteries that will run the scooter for 8 hours.All questions need 'make model (what is is)' as first 3 words. I can answer all your questions given that information. Click Comment under this message, don't make another post. You can also Edit that information into your question or I can if you answer within a couple of hours.

Read the label.

Some say it can, others dissagree.

Question edited for clarity and toss in some CAPS. Contact them for a Warranty Claim. Croc Professional Hair Tools - Croc Flat Iron Croc Officialhttps://www.crocofficial.com Shop The Professional, Ergonomic, and Elegant Hair Tools. Free Shipping With Any Purchase Over $49.99. ‎Flat Irons · ‎Infrared vs Non-Infrared · ‎Curling Irons · ‎Blow Dryers · ‎What's New ..

If it uses the old style flourescent lamps they use a ballast choke and they can buzz as they age.

If your Dalton Primechair is not receiving power from the control arm, there could be several reasons for this issue. Here are some troubleshooting steps you can take: Check Power Source: Make sure the chair is plugged into a working power outlet. Check the power cord and ensure it is securely connected to both the chair and the electrical outlet. Power Switch: Verify that the power switch on the control arm is in the "ON" position. If there is a separate power switch on the chair's body, ensure it is also turned on. Batteries (If Applicable): If the chair uses batteries, check if they are properly installed and functional. Replace the batteries if necessary. Remote Control (If Applicable): If the chair comes with a remote control, ensure that the batteries are installed correctly and that the remote is functioning. Fuse: Check if there is a fuse in the power supply line or within the control arm. If the fuse is blown, replace it with a new one of the same type and rating. Wiring Connections: Inspect the wiring connections from the control arm to the chair. Look for any loose or disconnected wires. Reconnect any loose wires securely. Faulty Control Arm or Power Supply: If none of the above steps resolve the issue, there may be a fault in the control arm or the power supply system. Contact the manufacturer's customer support for further assistance. They may provide guidance on troubleshooting or recommend professional service. User Manual: Refer to the user manual for troubleshooting tips and specific instructions related to the Dalton Primechair. If you are unable to resolve the issue with these steps, it's advisable to seek assistance from the manufacturer's customer support or contact a professional technician who is familiar with the specific model of your chair.

Less than 10 amps, but it has its own internal battery which is charged when the vehicle is running and there is no drain when the vehicle is switched off. https://www.1otg.com/Brochure/Joey%20Spec%20Sheet.pdf https://www.google.com/search?q=joey+bruno+wheelchair+lift+battery ...

Depends in which type or model of equipment. Otherwise it could mean anything.

What brand name is the scale?

Postal scale, bodyweight scale, kitchen scale, every scale ever made? Turn it over, look for a door or a screw, unless it is the only Taylor Scale that has a sealed for life battery and is not replaceable. 'make model (what it is)' in all questions, first 3 words please. ..

They are not normally capable of recalibration. You need a very special certified calibration weight. They are done at the factory and that is it. As long as the scale is on a flat level, firm surface they should be good. Full 'make model (what it is)' in all questions please. We can search and see if it is a known issue and if the company are recalling them.

They have a smart controller so it should display codes. Batteries connected correctly and fully charged? https://www.google.com/search?q=pride+jazzy+error+codes ..

If the joystick on your power wheelchair remains inactive even after charging, several issues may be at play. First, check if the charging process completes successfully, ensuring the battery is fully charged. If the joystick power persists to stay off, examine the joystick's connections and cables for any damage or disconnection. Additionally, inspect the battery terminals, ensuring they are clean and secure. If these steps don't resolve the problem, it may indicate a malfunction in the joystick itself, requiring professional diagnosis and potential replacement. Consult the wheelchair's user manual for specific troubleshooting steps or contact the manufacturer's customer support for guidance.

Repairing a leg massager depends on the specific issue it's facing. Here are some general steps you can take to troubleshoot and potentially repair a leg massager:

1. Check the Power Supply:
   • Ensure that the massager is properly plugged into a working power outlet.
   • If it's battery-operated, make sure the batteries are charged or replace them if necessary.
2. Inspect the Power Cord:
   • Examine the power cord for any visible damage or fraying. If you find any issues, you may need to replace the cord.
3. Review the User Manual:
   • Refer to the user manual that came with the leg massager for troubleshooting tips and instructions.
4. Test Different Modes and Settings:
   • If your leg massager has various modes and settings, test each one to see if the issue is specific to certain functions.
5. Check for Obstructions:
   • Ensure that there are no obstructions preventing the massager from functioning correctly. Sometimes, foreign objects can get caught in the moving parts.
6. Inspect Mechanical Components:
   • If you're comfortable doing so, open the massager (if possible) and inspect the mechanical components. Look for any loose or broken parts. Be cautious not to void any warranties.
7. Look for Loose Connections:
   • Check for loose wires or connections inside the massager. Reconnect any that may have come loose.
8. Contact Customer Support:
   • If your leg massager is still under warranty, contact the manufacturer's customer support for assistance. They may provide guidance on troubleshooting or offer a replacement.
9. Professional Repair:
   • If you are unable to identify or fix the issue yourself, consider taking the leg massager to a professional technician or contacting the manufacturer for authorized repair services.