20 Most Recent One For All URC-6131 Remote Control - Page 2 Questions & Answers

Codes for Magnavox are: 0062 0004 0009 0456 0183 0226 0288 0008 0068 0075 0141

You can't set up a universal remote control to any Blu-Ray players.

0088 0059 0142 0060 0072 0004 0009 0091 0001 0012 0061 0137 0139 0141 0179 0227

What is the brand name of your TV?

The Daewoo TV codes for the URC-6131 are 0451, 0019, 0039, 0092, and 0623 . The manual for the URC-6131 is available here: http://www.voxxsupport.com/images/User%20Manuals%20-%20FAQ%27s/URC6131.pdf . Please note that most universal remotes only have codes for TVs that were released 6 months or more before the remote was programmed. If your TV is newer than the URC-6131, you may need a new universal remote. (The URC-6131 manual has a copyright date of 2003. This version of the manual was scanned in February 2003.) I hope this helps. Cindy Wells

Three digit codes for Sharp are: 004/ 009/ 079/ 095/ 111/ 112/ 114/ 122/ 123/ 124/ 173

to know four digit codes and proceedings : Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as service help to electronic home entertainement equipments.

Pull up older posts. You can get all details.

Check associated ads too. Sometimes, it might help you.

0062 0004 0009 0135 0189 0183 0227 0456 0008 0068 0075 0141 0161

Hello
Setup codes for NEC tV with One for all urc-6131-6 device universal remote control are:
0030, 0019, 0056, 0497
OK.

check this site for info and help http://voxrightnow.custhelp.com/app/answers/detail/a_id/8158/~/programming-the-one-for-all-urc6131-universal-remote-control

Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC6131
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(www.sparky-uk.com)

Ebay is your friend its $10 shipped

EBAY just click it.

Hi,

Your remote is much older than your TV and there are no codes in your remote for Dynex TVs. I have included a link to the user manual in case you need it.

http://www.oneforall.com/uploads/support/9e15c67cf9731f8b8e9b376352f23493.pdf

Unfortunately, you will need to buy a newer universal remote or use the original remote supplied with the TV.

Please rate this solution if you find it helpful. Thanks.

The code for the lcd15dvd is 080

Hi,

You can download the manual for All URC-6131 from below website

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man
In this manual you have the codes for TV/VCR/DVD Etc,.

Thanx

I hope this would help you.

1, Turn on the tv.
2. On the remote control, press the tv key once.
3. Press and hold SET until the LED blinks twice, then release SET.
4. Use the code to locate the typ of device and brand name and then enter the first four digit code for the device. If performed correctly, The LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.
5. Aim the remote control at the tv and press power once. The TV should turn off. If it does not repeat steps 2 to 5. trying each code for your brand until find one that works. If it doesn't work, try searching for you code.

BTW, I don't know the brand of your tv so you might as well try these steps to search for you code but if you want to use the steps above just reply to this and send me the brand of your tv so i can search for the code.

1. On the renote control, press TV once.
2. Press and hold SET until the LED blinks twice, then release SET.
3. Enter 9 9 1. The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.
5. To lock in the code, press and release SET. The LED will blink twice.