20 Most Recent
Bosch 18 in. SRS45E02 / SRS45E08 Exxcel Slim-Line Free-standing Dishwasher - Page 5 Questions & Answers
My Bosch dishwasher has a E15 Error.
This is a flood sensor issue rather than a float switch issue. The sensor is in the tray and senses water from dripping hoses or worn pump seals. It doesn't need much water as the sensor is at the lowest point, so it only needs a teaspoon of water. you can check the connections at sensor end and follow it to the control board connector.
My Bosch Dishwasher is displaying an error code E15, what does it mean? An E15 error code indicates that the safety switch has detected water in the base of the dishwasher
. Your leakage protection system has activated.
Videos as well with fixes
https://www.google.com/search?q=bosch+dishwasher+has+a+E15
..
8/21/2022 5:11:35 PM •
Bosch...
•
Answered
on Aug 21, 2022
Bosch Dishwasher E01 Code
Two different ideas from Bosch, either control board or heater element, temperature thermistor. As it fails at the rinse stage where the water is hotter, I would check the latter, or just call for service and get it correctly diagnosed and fixed. If you want to try some things, check connections to the main control board and to the heating components.
https://www.google.com/search?q=Bosch+Dishwasher+E01+Code
..
6/7/2022 5:52:54 PM •
Bosch...
•
Answered
on Jun 07, 2022
Doorlatch accidentally locked on open door of Bosch dishwasher model shp65t55uc/02
Here is how to solve this problem. With the door open take a flat screwdriver and pull the small gray latch towards you until it snaps into the open position. There is no electrical connections to this part. It is totally manual. If the small u-shaped trigger is missing then a new part is needed. See the photo below.
6/1/2022 1:45:53 AM •
Bosch...
•
Answered
on Jun 01, 2022
Bosch dishwasher intermittently not completing cycle, not draining
it maybe something as simple as the door opening during the cycle - thus pausing the machine - this can happen when the machines with plastic tubs get hot - the top of the machine flexs a bit and the latch disengages and the machine stops. Next time it does it just try to push the door closed and hit start and see if it picks up where it left off. A stiffener is needed to repair the fault - but we have fixed with shims in a pinch - between the counter top and the dishwasher to minimize the flex
5/19/2022 1:09:50 PM •
Bosch...
•
Answered
on May 19, 2022
Sanitize cycle light will not go off on my Bosch silence 50
The Sanitize Option was not able to be switched off by pressing of buttons on a Bosch SHE863WF6N. Nothing appears in the manual about how to turn it off. (It might be noted that the other options appeared as though they probably could not be toggled either, though this was not thoroughly checked.) At this point, the dishwasher was unplugged (disconnected from the mains) for several minutes. Upon reconnecting the machine power, and though the dishwasher Sanitize option light was still on, it then became possible to turn the Sanitize option light off by simply pressing the Sanitize option button.
4/13/2022 6:10:58 AM •
Bosch...
•
Answered
on Apr 13, 2022
Not finding what you are looking for?