20 Most Recent
Bosch 24 in. SHX46A05 Stainless Steel Built-in Dishwasher - Page 5 Questions & Answers
Bosch SHU3032UC/U12 is not draining during the washing cycle.
For Bosch Dishwasher Ascenta models, open the door to reset it. Hold the Start-Reset button for about 5 seconds or until the Active indicator turns off. Shut the door of the dishwasher to allow it to thoroughly drain before turning it off.
This should reset the cycle drain.
9/12/2021 12:37:45 PM •
Bosch...
•
Answered
on Sep 12, 2021
Model SHY66C05UC /14. Why does it start, pump the water out, fill with water and then....nothing?
If you can connect to the circulation pump using a multi meter using the Ohm ? (resistance) setting, touching the 2 poles - and +, you can see if the motor is failing. If you get a current tester pen you can track the electricity along the wires to the circulation motor to see if the dishwasher is delivering power. If you remove the circulation pump you can have someone test it(by hooking it up to a direct power source). I had a similar issue and it was not the circulation motor, but the control board that failed.
9/6/2021 12:19:32 PM •
Bosch...
•
Answered
on Sep 06, 2021
Not finding what you are looking for?