20 Most Recent Bosch Exxcel WFX 3267 Front Load Washer - Page 11 Questions & Answers

0helpful
1answer

Hi have a bosch front loader logixx8 will not go on the big spin just goes around slow can you help thanks

It seems to me that the water pump is not emptying fast enough that seems that there might be something stuck in the pump clogging the outlet,first of all turn the machine off blow down the outlet pipe,if you cannot blow into it then remove the back cover and remove the pump housing to remove the blockage,resemble and there should be an improvement in the spin problem
9/27/2019 2:19:17 PM • Bosch Washing... • Answered on Sep 27, 2019
0helpful
1answer

Groaning noise in dishwasher cycle - appears to be at begining and end of wash cycles. Draining fine. Groans for for about 3 seconds and then moves on...

Washer may need descaling use a good cleaner at high temperature without a prewash minimum 75’degrees
9/24/2019 3:03:38 PM • Bosch Washing... • Answered on Sep 24, 2019
0helpful
1answer
0helpful
1answer

Where are the brushes located on a Bosch GSH11E

Brushes are located under the machine and are connected to the back of the motor
8/17/2019 2:49:52 PM • Bosch Washing... • Answered on Aug 17, 2019
0helpful
1answer

What does error code E2 mean? I have a Bosch Maxx

The e2 error is a generic error that the machine shows if it's been overloaded or if the load becomes unbalanced during a wash cycle.

to fix you must do a master reset of the washing machine.

1. Close the door and make sure the dial is pointing to the "OFF" function
2. Hold the Start/Pause button and turn the dial anti clockwise (to the left) to the "express 15 min" program at the same time.
3. Hold the Start/Pause button for a minute (the e2 message is meant to start flashing after a minute of holding the button down however with my washing machine this didn't happen)
4. Release the button and turn the dial back to the "Off" function.
5. Select any program and the message should not be appearing.
7/11/2019 3:38:10 AM • Bosch Washing... • Answered on Jul 11, 2019
0helpful
1answer

Bosch maxx 5 washing machine has stopped working , display showing 0-77

Try resetting the washer and see if it was a glitch.

1. With the power on press and hold down the start button.

2. While still holding the button down turn the dial one click anti-clockwise (15 minute cycle on mine)

3. If it shows '8888' on the display then skip to step 5, if it shows 'E3' turn the dial back to the off position.

4. Press and hold the start button down and again turn the dial one click anti-clockwise (15 minute cycle on mine)

5. With '8888' now displaying hold the start button in for 1 minute.

6. Stop pressing the start button.

7. Return the dial to the off position.
7/3/2019 6:01:14 PM • Bosch Washing... • Answered on Jul 03, 2019
0helpful
4answers

Washing machine bosch maxx 7 varioperfect

Sounds like have inadvertently activated the child lock. To deselect you need to press and hold the start button for approx 5 secs or until the key light goes out. Hope this helps, please let me know if this works or if you need further assistance.l
7/3/2019 12:56:51 PM • Bosch Washing... • Answered on Jul 03, 2019
0helpful
1answer

Error code E16 on my bosch washing machine

Cause: Water inlet valve fault. Action: Check inlet valve and water supply.
6/5/2019 5:51:42 PM • Bosch Washing... • Answered on Jun 05, 2019
0helpful
1answer

What is the maximum load for a Bosch wfl 2960?

https://washingcodes.com/bosch-dishwasher-error-codes/ Try the above. They are listed as knowing your brand codes.
4/16/2019 1:25:08 PM • Bosch Washing... • Answered on Apr 16, 2019
0helpful
1answer

Where is the fuse located located on bosch maxx 800

What is a Bosch Max 800??
4/14/2019 5:50:07 AM • Bosch Washing... • Answered on Apr 14, 2019
0helpful
1answer

Hi I have a Bosch Maxx 800 it works OK but now it trips the power out just wondering what it might be

Something overheating, wire shorted, bad breaker.
4/14/2019 5:46:01 AM • Bosch Washing... • Answered on Apr 14, 2019
0helpful
1answer

Anyone help me. Have a Bosch aquatak 1200 plus but no power going to motor fuse changed no difference. Plz help

chek if you have power by the on of button , if tere is power , chek transformer , if there is power on both sides , if motor have a capacitor , test it don,t get shocked ,u can test it with a meter , or it must be abel to make a spark, look for lose wires , chek if tere is belds on the motor and the drum ,chec if the pully on the motor axes is not lose , that the motor run but not the drum ,chec the power lead and the male plug that go to the wall , find the book let in dex for ansers lastly phone your electrical persone , but don ,t get shoked ! please hope it helped
4/7/2019 10:34:54 AM • Bosch Washing... • Answered on Apr 07, 2019
0helpful
1answer

Error Code on my Bosch Washing Machine E18. Cycle stopped midway, machine full of water . How to fix?

Drain timed out - check for clogged filter or drain motor malfunction. https://www.6ya.com/callphilipforhelp
4/4/2019 5:01:25 PM • Bosch Washing... • Answered on Apr 04, 2019
0helpful
1answer
0helpful
2answers

I have a bosch maxx wfl 1662 washing machine front loader , i do not understand its button what its meansand i do not have a manualplease help me

https://www.bosch-home.com.au/customer-service/get-support/manual-search
3/30/2019 10:21:36 PM • Bosch Washing... • Answered on Mar 30, 2019
0helpful
1answer

Bosch washing machine classiXX Error code E21 changed to E00. What should I do?

E00 usually requires a technician to reset, although you may manually do it by pressing and hold the start button for five seconds the "feature" should disable. E21 is blocked filter or excess of fabric in the filter over time. Turn the appliance off by the main supply, access the filter located on the bottom kick plate. Remove the filter and clean in hot soapy water, check the propeller for fabric debris. Run a hot wash without any clothing 70C or above with 1/4 cup white vinegar, you should do a maintenance wash at least every month and clean and remove the powder draw or detergent draw and inside every 2 weeks, clean the rubber door seal remove coins which are common and build up of debris
3_29_2019_7_41_45_am.jpeg
3/29/2019 7:42:14 AM • Bosch Washing... • Answered on Mar 29, 2019
Not finding what you are looking for?
Bosch Exxcel WFX 3267 Front Load Washer Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Washing Machines

  • Bosch Washing Machines

Most Popular Question

leak detergent drawer

  • Washing Machines
Loading...