Bosch Exxcel WFX 145S Front Load Washer - Answered Questions & Fixed issues

some thing is stuk in sump hose r in pump...... MY NAME IS KHAN,

yes,,,,,1 coup of soda crytal 1 coup of any vinegar 1 coup of diswasher salt put it on 90 degree empty wash..........and see the result..... my name is khan.

BOSCH WASHING MACHINE E29 ERROR MEANS INLET VALVE CONECTION WIRE IS BROKEN.I FOUND LAST TIME....MY NAME IS KHAN.

Check fuse and cpu

Find a PDF copy here: Bosch Classixx 5 Manual

You can find a PDF copy here: Bosch Classixx 5 Manual

it should unscrew out but you have items in your filter that are stopping it being unscrewed you need to remove the pump

the key is the child lock is on

change the motor brushes

pick the last program used ???? hold the clock button for five seconds?? the child lock should now be off

may be a blocked pressure pipe

you can buy a new rim easy to fit is it the inner or the outer rim check before you buy ???? you will need the enr no

pick the last program you put on ???? then you hold the button with the clock on it for five seconds the lock should now be off please leave feedback if it helps

take out plug first....then empty the water....take out the filter and clean it ....the pump should now be clear

take out plug first check the motor carbon brusher are not worn

check the water valve is on or the pipe [ inlet ] is not kinked

just go a bosch washing machine exxcel 14 express cant get it to work can anyone help i dont have the user book my email is [email protected]

This video will show you how to change a door seal on this Bosch front loader washing machine

F18 is time out on drain, check the pump filter for foreign objects (coins etc-behind flap, bottom right of front kickplate) and also check for blockages on outlet hose (especially if connected via spigot, directly to sink U bend)

Hi from retired Englishman in SW France,

When you say 'everything' you don't say whether that included the drain filter and motor ;-0(

Following are my complete and hopefully 'coverall' pre-typed guidance notes for checking both the drain motor filter and the drain motor ;-0)

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT (alternatively use a wet vac as sensibly suggested by VinnyB1234!)
If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!). These panels are either held on by (plasic) screws or will just pull off. Most filters are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play.
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. Using something suitable like a glove see if it is easy to briefly slow the motor down. If it is easy then the motor is malfunctioning.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C