20 Most Recent Generac 2000 Watt iX2000 Portable Generator - Page 3 Questions & Answers


The engine is starting and running too lean, meaning it is not getting enough fuel for the amount of air. You need to post a photo of the fuel system from the regulator to the carburetor so we can tell you where to adjust the fuel mixture.
You may be able to adjust the choke to a richer setting and make sure it works freely. If it has a Rochester type electric choke with the black plastic cover it is easy. There are 3 screws that you loosen and turn the plastic cover in the "rich" direction. It is marked rich and lean.

Generac... | Answered on Sep 15, 2018


If you do not use it often, it is possible that the throttle/governor is stuck. Check to see that the throttle shaft on the carburetor will move,
Some WD-40 may help it from sticking again.

Generac... | Answered on Sep 14, 2018


if its not cranking clean your battery terminals and check the charge level. also check battery water levels

Generac... | Answered on Jul 14, 2018


https://www.google.com/search?rlz=1C1CHBF_enUS757US757&ei=jFo_W8GRGeOh_Qa9upWYBA&q=1505+generac&oq=1505+generac&gs_l=psy-ab.3..0i22i30k1l2.3635.5354.0.5596.8.8.0.0.0.0.86.601.8.8.0..2..0...1.1.64.psy-ab..0.8.597...0j38j0i20i264k1.0.hcUENM8TBWQ

Generac... | Answered on Jul 06, 2018


www.generac.com

Generac... | Answered on Jul 06, 2018


notify generac or electrical companies [private or commercial ] for the information since fixya doesnt have any specs on your service or building

Generac... | Answered on Jul 03, 2018


If its blowing with nothing plugged in, then you have a short near whatever it is feeding. Usually 10amp is for the 12V circuit.

If its blowing with things plugged in, remove them and check each wire/device and try again.

Another tip. If the fuse is glass and the inside turns black, that means there is a dead short on the load side of the fuse. something is very wrong for that to happen.

If the glass is clear and the fuse wire is still visible and just broken, you have something drawing a little too much current and not a short. Usually a easier fix and lesser problem.

The fuse tip goes for any glass fuse that you can see into.

Generac... | Answered on Jun 02, 2018


https://www.partstree.com/parts/generac-power/portable-generators/0065140-gp8000e-generac-gp8000e-portable-generator-sn-8129687-8129750-2013/wiring-diagram/

Generac... | Answered on May 30, 2018


check generacs website or look in your manual

Generac... | Answered on May 05, 2018


Not sure what you mean by "slowly loses fire", do you mean power

Generac... | Answered on Apr 27, 2018


it didnt start after cranking 3 times. its probably time for service and a valve lash adjustment, clean battery terminals etc etc

Generac... | Answered on Apr 19, 2018

Not finding what you are looking for?
Generac 2000 Watt iX2000 Portable Generator Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Generac Electrical Supplies Experts

Sheldon Dedek

Level 3 Expert

909 Answers

Bob Janelli

Level 1 Expert

26 Answers

JOHN LAPIER

Level 3 Expert

2591 Answers

Are you a Generac Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Generac Electrical Supplies

  • Generac Electrical Supplies

Most Popular Question

need owners manual generac power plus

  • Electrical Supplies
Loading...