Kohler FANDANGO SELF-RIMMING LAVAVATORY SINK WITH SATIN FINISH K-2600-S-NA - Answered Questions & Fixed issues
I recently installed 2 Kohler bathroom sinks
remove the waste fitting and clean off all the putty. Using a clear or white silicon put some under the waste fitting collar then insert it into the basin hole. Next put the washer and nut on and wind it up to about 1/2" from the basin. Using the silicon again put plenty on between the washer and basin ensuring complete coverage of the waste circumference. Hand tighten the nut until silicon pushes out from the sides of the joint. Finally tighten about 1/2 turn using water pump pliers.
Wipe off all excess silicon.
You can tighten a little more if the waste fitting is all metal but i'm guessing its plastic and it is possibly being overtightened.
Need password for a stolen file
Okay. The question is a bit lacking in details. Password for what? Password ON what? Where was the file stolen from? Who stole the file? What is the file content. What is the file extension (the bit after the file name and the period file_name.what)?
All questions need to start 'make model (what it is)' first 3 words. And then a clear question.
For the 13 people that have tagged this 10 year old question, it is better to post your own question.
..
2/7/2024 6:03:08 AM •
Kohler Home
•
Answered
on Feb 07, 2024
•
6,889 views
Kohler Whirlpool jets are weak.
Kohler has good support. You can view the diagrams for that unit with the link I am posting. There are no filters listed in the diagram that might need to be cleaned. There is a chance that the unit has developed a clog from hair etc in the pump impellor. The flange may have come loose and is allowing air in the suction side of the pump too. Kohler has online chat and support numbers you can call too.
K-1357-RA ' Devonshire 5-Foot Whirlpool with Apron and Right Drain ' KOHLER
8/13/2021 2:05:35 PM •
Kohler Home
•
Answered
on Aug 13, 2021
•
149 views
Not finding what you are looking for?