Kohler - Toilet - One-piece - Gabrielle - K14257-WS-47 - Page 2 - Answered Questions & Fixed issues

I just posted an answer here, but don't see it. ??

The brand of toilet doesn't matter. You need a product that cuts calcium and lime. It may take some soaking and scrubbing. Once you get it clean, use the product regularly. CLR makes a line of products: https://clrbrands.com/en-US/Products/CLR-Household/CLR-Calcium-Lime-Rust-Remover

I don't know this specific tub, but here's the pictoral. The button (90105) should come out of its base, held by friction of O ring. This should allow you to disconnect the pressure line. If you are looking to replace the complete assembly, likely you will need a basin wrench to reach nut (65157). Here are links to Kohler, specific to this tub. https://www.us.kohler.com/us/catalog/svg_viewer.jsp?productId=415928&diagram=3 https://www.us.kohler.com/webassets/kpna/catalog/pdf/en/1010564_5.pdf

Smart-a$$ answer is to find an old 3 gallon pot in a salvage place. Best answer is to fiddle with the chain that goes from the handle to the flush flapper and see if adjusting its length makes a difference. If it's too short it might result in letting the flapper closing too soon and allowing your deposit to remain.

The jet that pushes the water through maybe clogged with calcium buildup.

There's something blocking it sometimes if you turn the water off in your home and turn it back on sometimes calcium from the pipes break loose and cause blockage in new style washerless valve assemblies.

Get a water hose,place in tub,connect to water outlet,turn on for a minute,then turn off.then disconnect hose,then water will come out.

Contact technical support: [email protected]

No ,you have to hold button to get full flush

Universals will work

Request it directly from Kohler.

https://images.homedepot-static.com/catalog/pdfimages/78/78c9d8dd-f9e2-4e23-98ff-244e66e0d260.pdf

Bidet?

Check the flapper and seat. Ensure that the flapper chain is not tight or caught underneath flapper. Check floor underneath tank for any sighs of water leaking or seeping from tank. tight tank to bowl nuts. good luck

Standard size is 2 inch

Try adjusting the float so your tank gets more water.

KOHLER Touchless Toilet Flush Kit 1954 0 The Home Depot It might be better to replace flush mech. The Price is about $40.00

You probably have one of the newer Cimarron-series toilets that feature what Kohler calls "AquaPiston" technology. These gadgets use the water pressure in your supply lines to pressurize a charge of flush water in the tank, causing the flush water to rush into the bowl at high pressure and velocity. Many Cimarron-series toilets use only 1.28 gpf (gallons per flush), compared to the current industry standard of 1.6 gpf for conventional gravity-flush units. Reducing the gpf rating by 20% requires pressurizing the water in the tank, and the release of pressurized water makes a lot of noise. I'm afraid your toilet will always be noisier than what you may be used to.

They should be able to help you . They have a website you can use to find parts you needed. As do other d i y stores.

usually the flapper is the first thing to check, sometimes the whole assy needs to be replaced and a new flapper will not seat and keeps on leaking