20 Most Recent Rotary Bosch 11536vsr 36v Sds+ Roto Hammer Drill Cordless Questions & Answers

Ok about changing the brushes but have you searched if the place where the brushes are located allow the brushes to move forward freely or they are in a way were narrowed so that the brushes can only move for few millimeters?

Have you removed the 4 gearbox screws? the cover should lift off. sometimes if a brush holder has over heated then the two halves get stuck together in places.

Once you have removed the 4 screws holding the gearbox to the main body take off the right hand half of the housing leaving the left half on the work bench. Unscrew the 2 screws that hold the brush holders down and remove the old brushes and refit with new ones. Rebuild in reverse.

https://www.amazon.com/Hiltex-10513-Rotary-Demolition-Chisels/dp/B000QBR4M0

Graingers or MSC industrial supply. Also Production tool in Michigan.

This photo is from a Dremel (not Drill Master) but it should be similar. Your tool may have different size collets that take different size diameter shaft bits. You may have the wrong collet (collar) for the bit you want to use. If your tool only has one size collet then there could be debris stuck in the collet slits which prevent the collet from compressing down on the shaft bit when the top nut is tightened. And sometimes it just takes more torque on the nut that screws over the collet to really tighten it down on the shaft

Before the invention of the hammer drill, people face a lot of trouble drilling in the tight spaces. They had to break down the parts in smaller units in order to drill it properly. But, now the time has changed and the users can easily drill on a portable manner. But, one might wonder, what makes the best hammer drill ? The answer is being more and more complicated each year with so many brands on the market. The market offering is huge and most of the brands are continuously reinventing their products. We have analyzed many different drills from cordless hammer drill to a corded hammer drill, to hammer drill machine to cordless hammer drill drivers. Thus, we have come up with these top picks.

check the utility voltage you connecting to

Hold the drill bit with bench wise jaws at up wright way and keep a piece of wood log with chuck head & give it a hammer shot opposite way.Be sure to loosen chuck fully anti-clock wise.If your drill chuck pull releasing type you have to pull it and put a brake on it.

Fixya does not stock parts for tools. Perhaps if you post the model (because the picture is not clear) we can locate some