20 Most Recent Pramac Storm 5000 Watt Generator - Page 7 Questions & Answers

all switches have to be off on any electronics to change the battery.

Electrical... | Answered on Apr 10, 2019

Most likely you ruined the engine. Major overhaul is what you are looking at. Diesel engine overhaul is really expensive. Have deeeeeep pockets.

Electrical... | Answered on Apr 10, 2019

Harbor freight has cheap ones. No matter which inverter, make sure that the dc wattage will be adequate. A car battery with the motor running will only support about 800 watts (1hp). Make sure the input cables are BIG and with GOOD clamps.

Electrical... | Answered on Apr 10, 2019

Check for debri under needle and seat - the only way for fuel to enter. check for properly seated needle by blowing into fuel inlet of carb while moving float to raised position.

Electrical... | Answered on Apr 07, 2019

Valve probably bent - replace valve - Lap in new valve.

Electrical... | Answered on Apr 07, 2019


Electrical... | Answered on Apr 07, 2019

Wrap screw with teflon thread tape and reinsert it.

Electrical... | Answered on Apr 07, 2019


We have a put together a guide here to assist you in these situations. It will guide you through testing and repairing the Generator. : https://www.generatorguru.com/need-help/
If you need any further help our Generator Engineers are happy to assist you.

Regards,The Generator Guru Team


Electrical... | Answered on Apr 05, 2019

Insufficient info to assist.

Electrical... | Answered on Apr 05, 2019

Please be kind to us all and explain what engine you’re referring to.

If you’ve found this helpful, please click the green “helpful” icon. If you have 20 seconds please leave a few words as a review or recommendation! Also, follow me for more answers to everyday issues, I’m all for saving you money and making the most of your time! Thanks and have a great day!

Electrical... | Answered on Apr 04, 2019

0.9 qt/L is what is needed to do an oil change

Electrical... | Answered on Apr 03, 2019

get a new key...get 2 of them

Electrical... | Answered on Mar 29, 2019

The battery is worn, the voltage rising on it immediately, the rectifier senses it and stops charging, thus blocking its overvoltage.
Machine It is normal to not start since the battery no longer stores the current.
Replace the battery!
However, be sure that the rectifier has no problems, you can test it with another battery, if the loading is finished instantly, it may be guilty, it can also be damaged.

Electrical... | Answered on Mar 28, 2019

Not finding what you are looking for?
Pramac Storm 5000 Watt Generator Logo

Popular Tags

11 questions posted

Ask a Question

Usually answered in minutes!

Top Pramac Electrical Supplies Experts


Level 3 Expert

84619 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers


Level 3 Expert

2222 Answers

Are you a Pramac Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pramac Electrical Supplies

  • Pramac Electrical Supplies

Most Popular Question

oil change

  • Electrical Supplies