20 Most Recent Pramac Storm 5000 Watt Generator - Page 3 Questions & Answers


Check and replace the spark plug, clean filters and try again. If this doesn't fix it, it is probably the carb. Clean it and try a SMALL squirt of starter fluid

Pramac... | Answered on Jun 17, 2014


ck the low/no oil switch seems i see a lot of problems with them in generators for some reason

Pramac... | Answered on Jun 04, 2014


The internals of the generator have to be removed and you'll need a gear puller to seperate the engine from the generator housing because they're pressed together. It can be a pain in the neck. There's videos on you tube on how to do it

Pramac... | Answered on Nov 27, 2013


clean out the carb

Pramac... | Answered on Nov 04, 2013


If you have a Yanmar engine...
There is a hose that is connected to the oil pan in place of the drain plug directly under the oil filter that will have an end cap. This hose is used to drain the oil into a waste container.
Download the service manual located at the address below and follow the instructions in the manual.
http://www.martindiesel.com/Documents/New%20TNV%20DIRECT%20Service.pdf
Hope this helps.

Pramac... | Answered on Aug 22, 2013


FIRST THINGS FIRST. VENTILATED AREA,FRESH GAS, OIL LEVEL. IF ITS BEEN SITTING FOR MORE THAN 2-3 MONTHS
THE CARBURETOR IS SUSPECT TO HAVE VARNISH PLUGGING JETS. START THERE. DARIN

Pramac... | Answered on Aug 02, 2013

Not finding what you are looking for?
Pramac Storm 5000 Watt Generator Logo

Popular Tags

11 questions posted

Ask a Question

Usually answered in minutes!

Top Pramac Electrical Supplies Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

wadingriver
wadingriver

Level 3 Expert

2222 Answers

Are you a Pramac Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pramac Electrical Supplies

  • Pramac Electrical Supplies

Most Popular Question

oil change

  • Electrical Supplies
Loading...