20 Most Recent
RTO PasLode 900420 Impulse Framing Nailer - Page 4 Questions & Answers
Paslode repair manual
All Manuals can be obtained online from Paslode (ITW). Just look up and then print. Hope this helps.
IM250 not firing.
I know this post is old, but nothing worked for me until I tried the following.little plastic triangle pin that fuel cell tip plugs into was somehow plugged in to far. pull that out, plug in gently, retry nailer.
Paslode
Make sure that you dry the top of the motor housing and connections.Make sure that the piston is up as far as it can go.When you depress the nose against the work the motor should run and if you look at the flashing light on the side it will stay constantly on and momentarily flash when you pull the trigger. If it goes red then check the battery is charged otherwise there coiuld be a fault with the motor. Is the inlet Valve facing the correct way with the bottom of the "V" facing down into the machine.Check the date of the gas, make sure it is not out of date.Is the gas cold? warm the cylinder up by putting it in your trouser pocket for 10 min. Paslode make winter gas for these cold days.
Not finding what you are looking for?