Top 20 Stanley 77 115 Intellisensor Plus Stud Sensor Questions & Answers

I had this problem as well. The solution was to replace the 9 volt battery that it runs on. The beep was much louder and it calibrated correctly. Apparently the old battery was enough to make the beeping sound but not strong enough to emit the energy required to penetrate the drywall.

You can view a manual for this product at
http://server.iad.liveperson.net/hc/s-44183334/cmd/kbresource/kb-552007645425770921/!DOWNLOAD?entryid=156229&attachid=19306
Or visit http://server.iad.liveperson.net/hc/s-44183334/cmd/kbresource/kb-8342273085529316507/front_page!PAGETYPE?category=2 and type 77-115 into the search box.

Hi Gene,

• Place the unit flat against the wall.
• Press and hold the button.
• The LED will come on for a second or two then go out.
• Slowly move the unit laterally until the LEDs come on again.
• When they top out, that is the beginning of the stud.
• When they start to go back down, that is the end of the stud.

That's about it..

Best regards
Mike

You need to change detector tip sensor OR re-calibrate the unit.

Hello,

Here are instructions to get the manual for this sensor:

Go to Stanley Support

Click on the "Knowledge Base" link.

When the window opens type 77 115 in the search block and click on "Search". (NOTE: Leave a space between 77 and 115 or this will not work.)

The Instruction manual should be on top of the list that appears.

Click on the link under the "Article Name". (77-115 Intellisensor Plus Instructions)

On the next window click on the small icon under "Format". That will open up a PDF file for you. Save it to your computer for future use.

If you have any trouble, just comment back.

Thanks for using Fixya.

Hello,

Here are instructions to get the manual for this sensor:

Go to:
Stanley Support

Click on the "Knowledge Base" link.

When the window opens type 77 115 in the search block and click on "Search". (NOTE: Leave a space between 77 and 115 or this will not work.)

The Instruction manual should be on top of the list that appears.

Click on the link under the "Article Name". (77-115 Intellisensor Plus Instructions)

On the next window click on the small icon under "Format". That will open up a PDF file for you. Save it to your computer for future use.

If you have any trouble, just comment back.

Thanks for using Fixya.

replace battery. Check your manual that came with unit. copy and paste Stanley fat max power it 1000a battery

I'm having same problem... anyone know?

It is a known issue! https://www.google.com/search?q=stanley+fatmax+powerit+1000a+wont+turn+off ..

TAKE IT BACK TO THE DEALER

Question edited for clarity. The LED Area Light or the Unit display. The backlit display always stays on to alert you to the internal battery status, so that when you come to use it, it should be fully charged. https://www.manualslib.com/manual/2188388/Stanley-Fatmax-Pp1dcs.html?page=2&term=light&selected=1#manual

Possible low battery.

here is the website:https://www.stanleytools.com/products/hand-tools/flashlights-lighting/spotlight/waterproof-led-rechargeable-spotlight/fl5w10and they say the warranty is 1 year:Warranty1 Year Limited WarrantyThe manufacturer, Baccus Global warrants products against defects in materials and workmanship for a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser ("Warranty Period").If there is a defect and a valid claim is received within the Warranty Period, the defective product can be replaced or repaired in the following ways: (1) Return the product to the manufacturer for repair or replacement at manufacturer's option. Proof of purchase may be required by manufacturer. (2) Return the product to the retailer where product was purchased for an exchange (provided that the store is a participating retailer). Returns to retailer should be made within the time period of the retailer's return policy for exchanges only (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges. Please call 1-877-571-2391 for more information or return instructions.This warranty does not apply to accessories, bulbs, fuses and batteries; defects resulting from normal wear and tear, accidents; damages sustained during shipping; alterations; unauthorized use or repair; neglect, misuse, abuse; and failure to follow instructions for care and maintenance for the product.OOtherwise, check with the seller who sold it to your wife - If they are unwilling, and more companies seem to be going this route, go to the Manufacturer

I have just read the device instructions and although the device offers usb charging or power up to half an amp it does not and cannot communicate digitally...

Yes. Unless one was provided the standard is to just use an extension cord.

Stanleyville

You will have to buy charger for Stanley fatmax 700 it will cost you around 12$ to15$. You can buy it from any online shopping website like eBay or any other.

You have a shorted cell in the battery replace it.

Watch this video. https://www.youtube.com/watch?v=do8W9t3gRp4