20 Most Recent Humminbird 140c Fishin' Buddy - Page 4 Questions & Answers

yes and cost ?? it is what it is

click menu twice scroll down to (unit) click on it scroll down to simulator mode see if its on if so click on it turn simulator off

go to menu click on system go to simulator click off

go into menu scroll down to system click go to simulator mode see if its on if so turn it off

If it was purchased new, you should be able to get a replacement under warranty. If not, here is a link to the owners manual to troubleshoot it. Check for any frayed sections of the cable around the transducer or damage/cracks on the transducer itself.
http://store.humminbird.com/media/document/PiranhaMAX_150-160-170-180-190c.pdf

Hi danshell,

Please follow the below instructions carefully :-

I assume that you have the software installed and your memory card reader or the SD card reader is working properly , and you are able see the removable drive which is relevant to your memory card.

Firstly after you insert the memory card in your device , turn on the GPS system , and then you need to press the menu button two times.
When you do that you need to highlight the setup option , and after that you need to select transfer my data and then press ok or enter.

Now it will ask you to either save or load , here you need to select save.

Then you will find a menu displaying the memory card and the default filename which is data.usr.

when you highlight the save data option and select ok or enter you should get a message as 'User Date Saved Successfully'.

This message confirms, transfer of data to SD card successfully.

Now when you save it successfully , then only you would be able to open up the file from the memory card via the software application that you have.

In case you have any queries , feel free to get back to me.

You need to take it apart and look for a open surface mounted fuse, it will be mark with na f for the location on the circuit board.