Canon PowerShot SX500 IS Digital Camera - Jap/Eng - Answered Questions & Fixed issues


Its broken. Take it to a canon repair shop.

Canon PowerShot... | Answered on Jan 23, 2015 | 47 views


I am not sure if this is the right solution. If you mean the focus is constantly changing while shooting in video mode, you have to change your settings to something other than tracking and auto focus. When these menus are selected, the camera constantly adjust it's lens to maintain the subject in focus. If the subject moves, the camera re-adjust again and that usually records the blurred moments in the video.

Canon PowerShot... | Answered on Sep 02, 2014 | 46 views


I was extremely lucky to have many talented and generous photographers take me under their wing to show me the ropes. Without their valuable advice there is no way I would have become the photographer I am today. The Best Candid Wedding Photography Chennai as NDS photography in Chennai
Welcome To NDS 24x7 Studio
nds (4)-b2fh1usk30gaat4h2ysqy3a5-4-0.jpg

Canon PowerShot... | Answered on Jul 19, 2018 | 798 views


If the batteries are the same age as the camera, they are probably worn out. Try replacing them.

Canon PowerShot... | Answered on Jan 08, 2018 | 288 views


What did the error prompts?

Canon PowerShot... | Answered on Dec 22, 2017 | 400 views


Settings menu to off the option

Canon PowerShot... | Answered on Nov 17, 2017 | 567 views


So the pics vanished from the memory card, right? Perhaps you can insert the card to your computer and try a photo recovery tool on it. Give this app a try if you're a Mac user. Recover Digital Photo Music and Video on Mac OS

Canon PowerShot... | Answered on Aug 17, 2017 | 1,124 views


Try doing a factory reset.

Canon PowerShot... | Answered on Jul 03, 2017 | 173 views


The wrist strap has a thin loop on one end. Thread this thin section (like threading a needle) through the strap hole. (It's on the left side of the camera. There are two openings with a bar over the top of the center of them at the bottom corner of the camera body.) Start threading from the middle of the body of the camera and push the strap towards the bottom of the unit. You may need to twist the loop to narrow it and keep it tight. Once you have this narrow loop through the camera, open up the loop and slide the thick material through the center of this thin loop. Pull the wrist strap until the thin loop tightens around the bar.

This is shown on page 12 of the D30 manual. The manual is available from Canon support on the Powershot page: http://gdlp01.c-wss.com/gds/5/0300013985/02/psd30-cu2-en.pdf. The direct link to the manual is http://gdlp01.c-wss.com/gds/5/0300013985/02/psd30-cu2-en.pdf .

I hope this helps.

Cindy Wells
(Many lanyard straps for electronic gear work the same way. Threading the narrow section under that bar does require decent near point vision. People who are far-sighted may need to wear bifocals or ask someone younger to assist.)

Canon PowerShot... | Answered on Feb 18, 2017 | 213 views


Reduce the quality in the menu

Canon PowerShot... | Answered on Feb 02, 2017 | 214 views


Each attempt to do what ?

Canon PowerShot... | Answered on Dec 28, 2016 | 334 views


Get a card reader for your computer, if it doesn't already have one. The card will then appear as another hard drive, and you can transfer photos the same way you transfer any other kind of files.

Using a card reader is also likely to be faster than connecting the camera to the computer/

Canon PowerShot... | Answered on Jan 04, 2017 | 667 views


Do you mean when playing video back on the camera? If so, when the video is playing, press on the top of the wheel, the part with the triangle pointing upwards (up-arrow). You should see the small volume level indicator get an increasing number of bars and the volume will increase.

Canon PowerShot... | Answered on Dec 12, 2016 | 379 views


Hi Charlie,
Please provide additional info if you really want help in this site. Questions with sufficient information do get answered sooner than others so consider that. Otherwise, check answers to previous questions of similar nature and you might locate a suitable solution for your question.

Canon PowerShot... | Answered on Oct 30, 2016 | 488 views


Just go to the Canon web site for manual download.

Canon PowerShot... | Answered on Oct 22, 2016 | 282 views


hi, go to the settings tab, you will find the language settings , this will surely work

Canon PowerShot... | Answered on Oct 03, 2016 | 686 views


This is an OLD camera that uses CF cards - the earliest type of card storage. I have provided a link to the manual for the camera - it is considered as Powershot S20 based on your PC1002 number. On page 21 of the manual (page 24 of the pdf) there is a table listing the compatible cards. Another Canon link (provided) states you can use CF Type 1 cards.

https://support.usa.canon.com/kb/index?page=content&id=FAQ100296


http://www.wedophones.com/Manuals/CamerasAndCamcorders/Canon%20USA%20Canon%20PowerShot%20S20%2032MP%20Digital%20Camera%20w%20Manual.pdf

Canon PowerShot... | Answered on Aug 30, 2016 | 101 views


Can you access the images on your computer ? If you can, then the fault lies in the camera. If you cannot, then the card may have become corrupted and you will have to rely on your backup copies.

Canon PowerShot... | Answered on Aug 03, 2016 | 606 views

Not finding what you are looking for?
Canon PowerShot SX500 IS Digital Camera - Jap/Eng Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2253 Answers

Doberman

Level 2 Expert

261 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...