20 Most Recent Canon PowerShot SX500 IS Digital Camera - Jap/Eng - Page 6 Questions & Answers


https://www.youtube.com/results?search_query=sd+card+write+protected+remove sd card write protected remove YouTube

Canon PowerShot... | Answered on Aug 30, 2014


check the memory battery if there is one. it should be possible to change it in the menu ever if the battery is dead, but turning it off may reset it back to factory default

Canon PowerShot... | Answered on Aug 22, 2014


  • mechanical problem or the lens cover is jammed check the fron cover if there is any foreign object obstructing the cover .
  • have it checked in your nearest service center

Canon PowerShot... | Answered on Aug 22, 2014


  1. Go to the camera menu, scroll through to "Date/Time"
  2. Press the left/right arrows to choose an option field (month/day/hour/minute)
  3. Adjust that setting by pressing the up/down arrows or using the dial
  4. Select SET/OK when done
Instructions are located on page 147 of the user's manual. You can download a PDF version of the manual from Canon's website.

Canon PowerShot... | Answered on Aug 22, 2014


Self timers on Canon cameras can be accessed from the operations menu. in most cases, the times are pre-programmed - e.g, 5 sec, 10 sec etc.

Canon PowerShot... | Answered on Aug 19, 2014


Battery contacts could be insulated with light grease from hands etc. Try using a small throwaway nail file to gently clean the contacts on the camera.

Canon PowerShot... | Answered on Aug 18, 2014


Start with http://www.canon.com/
Select your part of the world and go from there.

Canon PowerShot... | Answered on Aug 01, 2014


Most often when this happens, it is, as you\'ve stated, a battery, but it might also be a corroded battery connection. You can use an eraser, or if its physically obvious, try a tiny piece of fine sandpaper, but use it gently, only to clean off corrosion. It may also be that your camera was dropped and a soldered circuit connection damaged, or it might have been exposed to penetration of moisture. The best thing you can do is 1. Give it time, say a month, to dry out, and 2. Send it in for an examination by Canon, being sure you tell them you\'ll need a repair estimate to ensure it is cost effective. Most often with a hand-held point-and-shoot it is not. Will it start up when you connect to your computer?

Canon PowerShot... | Answered on Jul 27, 2014


Good. Excellent question. Yes is the answer. Yes indeed.

Canon PowerShot... | Answered on Jul 25, 2014


Check warranty or youtube.

Canon PowerShot... | Answered on Jul 21, 2014


This is something that you cannot fix unless you have a lot of knowledge about electronics and special tools. The flash uses high voltage components and they can fail, the flash tube may be bad or the wires to it have come loose. Cameras are delicate and you should see if it is worth fixing vs buying a new camera

Canon PowerShot... | Answered on Jul 18, 2014


Canon is having almost all manuals for free. Yours is here:
http://gdlp01.c-wss.com/gds/0/0300008700/01/pssx50hs-cug-en.pdf

Canon PowerShot... | Answered on Jul 14, 2014

Not finding what you are looking for?
Canon PowerShot SX500 IS Digital Camera - Jap/Eng Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2253 Answers

Doberman

Level 2 Expert

261 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PowerShot Canon

  • PowerShot Canon

Most Popular Question

battery fully charged but camera will

  • Cameras
Loading...