20 Most Recent
- Page 5 Questions & Answers
Canon powershot has e32 message
turn off the camera .
place the camera with the lens facing up and check the spacing between the lens and housing. if you notice a gap gently press down the lens on the side where the gap is . try powering the camera back on
on Nov 07, 2014
How to recover deleted photos
If the photos were on a memory card and you haven't done anything to the card since you deleted the photos then you may be able to recover at least some of the photos. Do a Google search for "data recovery software" and select a program for your computer and operating system. Take the memory card out of the camera and put it into a card reader attached to your computer. Cross your fingers and run the program.
on Oct 22, 2014
Why won't my Dell computer, using windows 7, recognize my Canon Power Shot A720is when I try to download pics ?
Try NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa ( http://picasa.google.com
on Oct 05, 2014
How to fix E32 error on canon powershotSD1300IS
This error normally comes when your Canon camera lens gets stuck in the barrel itself. There are some steps which can be followed to resolve this problem which as follows,
STEP 1: Switch on the camera while you hold the shutter button and connect it to the AC adapter or to the USB cable at the same time.
STEP 2: Now by default the lens should get properly aligned if not try to twist them slightly by holding down the camera lens with soft hands.
STEP 3: Just push and pull the lens slightly as it extends automatically.
STEP 4: Now when the lens is in the hard surface power on your camera.
STEP 5: Try to hit the camera softly beside the lens which might solve the issue.
You can try to format the memory card completely and then reinsert to your camera which might be the issue at times.
on Sep 20, 2014
Not finding what you are looking for?