20 Most Recent
Faberware FCP412 Coffee Maker - Page 8 Questions & Answers
Espresso part not working, even without coffee. Not building enough pressure?
Question edited for funky spelling of Iv'e rather than I've a contraction of 'I have', the apostrophe replaces the letters 'ha'.
By your own diagnostics the nozzle itself is blocked. Look inside for a filter matrix that gives the 'Crema'.
Although you don't mention make and model (all questions need that), typically these machines need dealer service every 12 to 18 months in a home setting. Of course they don't tell you this when you buy them. In a commercial setting, my coffee machines were serviced in house every month. One machine did a thousand cups a day!
Coffee beans grind but water comes out clear. No coffee.
When a grinder is jammed, generally the motor won't be able to spin the burrs to grind the beans. This can happen for a couple of reasons: coffee oils and debris can easily build up in the burrs if they have been left to collect over time.
How do you reassemble a Capresso 560 Coffee Grinder?
Using these methods, you may reassemble a Capresso 560 coffee grinder :-
- Verify that the grinder is disconnected and touchably cool.
- Reinstall the bottom burr component.
- Replace the three metal balls and three springs under the burr.
- Replace the bottom burr piece with a screw.
- Change the T10 11.59mm screw.
- Put the green wire back where it was.
- Change the washer and metal retainer.
- Put the hopper back where it belongs.
- To check that the grinder is operating correctly, turn it on and ground some coffee beans.
Here are some extra pointers :-
- Take care not to misplace any of the tiny components. Before tightening the screws, make sure the grinder is correctly positioned.
- You can take the grinder to a trained technician if you don't feel comfortable reassembling it.
Miele CVA4075 steam system doesn't work properly
Since you've checked and replaced several components, and the issue persists, it's possible that there might be a more complex underlying problem. Here are a few additional things you could consider:
- Pressure and Flow Sensors: The steam system might have pressure and flow sensors that regulate the steam output. If these sensors are malfunctioning or not providing accurate readings, it could cause the behavior you're experiencing. Check if there are any sensors related to steam output and ensure they are functioning correctly.
- Electrical Connections and Wiring: Inspect all the electrical connections and wiring related to the steam system, including the sensors, solenoid valves, and pump. Loose or damaged connections can lead to inconsistent performance.
- Control Board: The control board that manages the steam system's operation could be faulty or not functioning as intended. If you've ruled out all other possibilities, it might be worth considering the control board as a potential source of the issue.
- Calcium Buildup: Even though you've mentioned that everything is clean, there might still be some calcium buildup in parts of the system that are affecting its operation. Consider running a descaling solution through the system to ensure all components are free from any mineral deposits.
- Consult Professional Technician: At this point, given the complexity of the issue and the components you've already checked and replaced, it might be beneficial to consult a professional technician who specializes in Miele appliances. They might have specialized tools and expertise to diagnose and repair the issue accurately.
Remember that working on complex appliances like the Miele CVA4075 requires technical expertise, and it's important to prioritize safety. If you're not comfortable with certain troubleshooting steps or if the issue remains unresolved, seeking professional assistance is recommended.
Not finding what you are looking for?