20 Most Recent Nokia N97 Cell Phone - Page 4 Questions & Answers

ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will SolvedIf For puk & pin cod problem So PleaseVery Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office opratorEnter The Puk code and YesEnter The pin code and YesSo Puk code Open and Problem will Quickly Solved

in mobile service center they will give you code

remove battery for 5 minutes then put it on original charger and wait few hours, then try to power on it

ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000IF Problem not Solved SoPlease New Software install in the Phone Problem will SolvedIf For puk & pin cod problem So PleaseVery Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office opratorEnter The Puk code and YesEnter The pin code and YesSo Puk code Open and Problem will Quickly Solved

Hello,Nokia designed the N97 with a touch-screen calibration program to remedy problems with the touch screen. Opening the touch-screen calibration program requires you to use the touch screen, which can prove difficult. You're forced to judge where to tap the screen because the screen isn't recording the precise location of your taps. To find the touch-screen calibration program, open the main menu, select "Settings" and then "Touch Input." The program provides on-screen instructions to help you finish calibrating the screen.

Too much pressure has been placed on that part of the screen for extended periods of time and thus throws off the sensor. Also could be that you have been dropping the phone quite a bit as well. As a solution you may be able to reset the phone to see if it is simply the sensor needing to somewhat of a tare like a scale almost. I had the same problem with my Droid and this helped.

See this tips and fix it. God bless you

• The simplest of all the cellphone screen issues to correct is a minor software glitch. These glitches can come out of nowhere and do many strange things to your device. To correct the problem, simply remove the cellphone's battery, wait a few seconds, and then put the battery back in. Power up the device to see if the quick reset corrected the screen issue. Additionally, some devices also have a hard reset that you can do without needing to see the screen. If your device has this kind of hard reset function, and you don't mind losing all of the information in the cellphone, a hard reset can sometimes correct issues that a soft reset will not.

Hardware Failure

• The most common reason for a cellphone's screen to go black is a simple hardware failure. This can be caused by the actual LCD going bad, by the cable that runs between the LCD and control board going bad, or even just from the cable's connectors coming loose. To fix these problems you need to open up the cell phone and replace or reseat the defective part. The exact process and tools for taking your device apart will vary wildly by model, but most just require a small screwdriver and a simple pry tool. Once the device is open, inspect the LCD and cable for damage; if none is found, simply replace both parts.

Liquid Damage

• When water comes into contact with an electrified board, the impurities in the water can allow current to flow in directions that it was not intended to, causing a short circuit. Even if your control board isn't damaged by a short circuit, the corrosion caused by the water can impede the flow of electricity and cause certain areas of the cellphone to no longer function. If you find green or brown areas of water damage on the circuitry, cleaning it off can sometimes get your device working again. Use 98 percent isopropyl alcohol and a soft brush to remove the corrosion, then put the device back together to see if anything changed.

Other Recourses

• If your cellphone is still under warranty, then your best option may be to take it back into the store where you purchased it. Some stores have qualified technicians available to repair your device, while others will simply replace it with another phone. Either way, your cellphone should be working again. Note, however, that this is not an option if you have opened your device to try and repair the screen or if your cellphone has water damage, as these both will void the warranty. Instead of a warranty repair or replacement, if you have purchased insurance on your cellphone you can also choose to contact the insurance company. You'll have to pay a deductible, but the insurance company won't care if you have opened or damaged your device.

do hard reset by turn your phone off and simultaneously press these four buttons circled in red.

• Caps shift
• Space bar
• Delete button
• On button

default lock code for nokia N97 is 12345.

You may try default phone and security code to remove restrictions.ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will Solved

Hi If the USB Socket (usb board) found no damage the only thing is to apply jumper.So, you can contact nearest mobile repairing shop or follow this link N97 charging solution.Thanks for visiting fixya

First Option:mostly nokia chargers doesn't make problems...just try the following..connect ur mobile with a system (usb cable)...found out whether it is charging or not...if the same prblm appears then there is a prblm in ur cell phone or power jack(socket)...if it charged with usb cable buy a new chargerPlease change Phone Bettery and check the chargingIF Charging Problem not Solved SoSecond Option:Your Phone charging IC Fault So Please change charging ICAnd charging Problem will Solved Quickly

Hello,

the default for all nokia phones is 12345

This will work that is if the code as not been changed by you or someone else.

Take care.

get the code from vodafone center.

Hi,let me give you the best solution for your problem.First, Remove your memory card>,insert to card reader>,copy all the data from mmc to desktop>,format the memory card>Restore the phone by typing *#7780# to default setting without inserting the memory card>now move/copy from Pc to phone/memory card.There will be no interruption.Good luck,Thanks for visiting fixya.

hi are you in need to remove the network lock in your nokia n97 mobile then codes are the best method to unlock it .to purchase codes visit simpleunlocking.com here they ask you the network name to which your mobile is locked .finally they send you codes to unlock your mobile.