20 Most Recent Hotpoint Ariston AWD129 Front Load All-in-One Washer / Dryer - Page 9 Questions & Answers

I would like to know if there's water coming into the machine on a normal wash then I can give you an answer to the problem eric

Checkout: https://www.hotpoint.co.uk/appliances-1/integrated-washer-dryers-3/hotpoint-aquarius-bhwd-129-1-integrated-washer-dryer-white/F071778/

Hotpoint 720 incorporates a fill pressure switch, it monitors the fill level and passes instructions that sufficient water level has been reached, and instructs the programmer to continue to the next stage of the cycle. Accepting, that enough water has entered the drum, the level switch could be faulty, however it is most likely to be the programmer. To test any of the fault finding to cure this fault requires removing panels and I would not recommend you doing this unless you are qualified. If you are however qualified and satisfied that you can proceed safely, with concerns for your own safety, I will send you, a process on how to proceed, checking out weather it is the pressure switch or the programmer. Trust you find this answer helpful Adam

Replace the paddle check the carbon brushes

unplug the unit for 5 minutes then plug back in. let me know what happens.

I would call the local washing Machin repair person for a quote eric

tale plastic back panel of at rear of machine and loosen black sump hose filter within

It sounds like it is not pumping out or you have a blockage on the outlet pipe .

go to the manufactures website and download the user manual its normally free eric

Hotpoint makes a massive range of washing machines and i noticed you didn't include a model number, but nevertheless Google says it's a blocked pump/filter.... i guess you tried Google too?

mean internal frost buildup on some units. let unit sit for awhile.

On my machine you just hit the cancel button 2 times to reset.

Unplug your washer for 10 minutes, consult your users manual while waiting, then plug it back in, Still unresponsive, contact an authorized service tech. I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

More than likely something like a sock or other object is blocking the pump inlet.

There is a seal for heater that most likely is not correctly in place.