20 Most Recent Fisher and Paykel WL26CW1 Top Load Washer - Page 9 Questions & Answers

check pump for burnt windings,if good faulty main computer board

its probably the rotary position sensor,it would help if i knes what lights are on at the time

check drain pump for burning smell sniff it or and discolouration of the copper windings

i need to know which lights are lit up

blocked ,jammed or fulty drain pump

if you didnt run the pump on the bench dont be fooled by any readings it canstill be stuffed

its easy if you know how hahahah the pump either has something jammed in it or its faulty

main computer board is faulty

check for blocked or jammed pump if all good replace pump

replace the pump most likely has burnt copper windings

blocked or faulty drain pump

no you cant the bowl just hangs in them, if it keeps going out of balance put a new set of suspension rods in

if your good with your hands they are the easist machine ever to do them on

there is a lid switch located under the top of the machine on the right hand side activated by a magnet in the lid this is probable faulty

this code imeans a faulty rotary position sensor and easy fix

do you mean fuse ? if so its on the main computer board

as this fault doesnt exist i would say the main board is faulty

most likely a faulty pump try tht first

easy as remove cap off the top of the agitator,inside at the bottom there is aa wing nut undo anticlosewise and remove agitator

this is a fault code 43 which mean the out of balance switch is either faulty or the switch isstuck in the on positionfree up or replace switch which is located just under the main board