HP LaserJet P2055d Printer - Answered Questions & Fixed issues


  1. The steps below are for changing the printer's language from the control panel or the web services.
  2. Remove the protective film on the printer's control panel to enable full response from the control panel. If you have not installed the printer software, go to the manufacturer's website and type the printer model, and click Begin. In the window that prompts you to download the printer driver, click Download. Now click Run, Save or Open, whichever is displayed on the window.
  3. Open the Downloads folder and give a double-click on the driver file. Follow the prompts to complete the setup and installation. When the 'Information About Your Printer' screen opens, select Edit. Select a language from the list of languages and complete the printer registration and activation on the manufacturer's website.
  4. If you want to change the language through the Embedded Web server (EWS), swipe the display to the left and tap the Setup icon on the printer's control panel. Select Tools followed by the Network Configuration report. Wait until the printer prints the Network Configuration Page.
  5. Locate the URL for EWS on the page and type the URL on your browser. Hit Enter to open the EWS page. Open the settings menu and select Preferences. Now click on the International icon to get access to all the international languages. Click the Control Panel Language option, choose your language and then select Apply.
  6. To set language from the printer's control panel, carry out the instructions given below. Power up the printer and tap the Setup icon. Select the Preferences option and open the Language menu. You will now see a list of supported languages. Tap on the language you prefer and then confirm your choice by tapping Yes.

HP LaserJet... | Answered on Dec 18, 2018 | 2,450 views


try giving ping command to the ip of the printer
if you get a reply from the printer in the command prompt then the printer is properly connected to the network. for a precaution try to switch off the printer and if then too you get a reply there is conflict with the same ip.

if you get a proper reply from the ip try installing the driver once again

HP LaserJet... | Answered on May 03, 2016 | 32 views


Print the configuration page of the printer and it should list the IP address.

HP LaserJet... | Answered on Aug 03, 2015 | 50 views


The black cartridge may be exhausted or defective. Try erasing the paper count in printer menu

HP LaserJet... | Answered on Aug 01, 2015 | 42 views


I had the same problem. Try adjusting the setting to fit on one page (did not work for me on my hp but worked on my brother MFC) or remove the device and reinstall with updated drivers

HP LaserJet... | Answered on Feb 14, 2015 | 121 views


Hi, remove the toner cartridge out of the printer then remove the jammed paper.

HP LaserJet... | Answered on Feb 11, 2015 | 710 views


replace cartridge or clean the grunds that togh it

HP LaserJet... | Answered on Nov 22, 2014 | 25 views


Any 10 error on an HP indicates a problem with the memory chip on the cartridge. Try another cartridge if you have one.

HP LaserJet... | Answered on Sep 23, 2014 | 43 views


Hi, the output sensor is located on the output paper.
you can verify that it has a black wing

HP LaserJet... | Answered on Jul 15, 2014 | 22 views


We have found this error is not related to the cartridge area. We found that the exit flag spring in the back of the fuser is wound to loosely. Carefully take the spring while it's in place in turn it one full turn tighter. You will need a hook for this procedure or a bent paperclip. Resecure the end of the spring and bend the tip so it does not unwind. For good measure place a small amount of glue on the end of the spring. Our customer has about 100 of these machines in 10 of those were giving the jam and cartridge area message. After performing this procedure on all 10 we never had another issue with the machine

HP LaserJet... | Answered on Jul 02, 2014 | 828 views


If fuse blow up there should be a reason. In most cases damaged/shorted component/s at its main power supply regulator section. Contact any service technicain. This is not a user reparable fault. Gopakumar Gopalan Google

HP LaserJet... | Answered on Apr 22, 2014 | 71 views


does this happen in all jobs or just certain jobs.Try printing a config page by going to reports and config page, enter.

HP LaserJet... | Answered on Apr 15, 2014 | 95 views


Hi ahmed,
I suggest You Go to Official HPPrinter Page For You HP Printer Problem On Below HP forum URL Link:
HP P2035 Issue Printing from MS Excel HP Enterprise Business Community In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On : HP Support

HP LaserJet... | Answered on Mar 04, 2014 | 78 views


sounds like a short across the mains input on the power supply/ or triacs shorted out on fuser driver pwb,
before replacing the power supply (needed) you may also want to replace the fuser unit assembly as a whole as the problem may well have originated from here. ( I would suggest at this point if your toner supply is low for this machine -that it is just as cheap to replace the machine as it is to replace the power supply fuser and toner

HP LaserJet... | Answered on Jan 28, 2014 | 611 views


If it's a new printer, you may be using incompatible media. If the paper stops so that part of it is past the toner drum and part of it is before the toner drum, then the feed-roller assembly is not feeding properly. If the paper stops at the fuser, then the fuser rollers are not picking up the paper the way they should.

If there is toner on the paper, or part of it, but it just stops before it reaches the output tray, the output rollers are probably worn. If the printer sat unused for a long time, the rollers can dry out and not grip the paper correctly.

If the paper doesn't make it into the printer at all, the feed roller and separations pad are bad. I hope this helps.

HP LaserJet... | Answered on Jan 20, 2014 | 53 views


Does it make a noise as if its doing anything? Most common thing is the pickup roller has worn out, they're really easy to replace, you can just search google or ebay for - pickup roller and whatever the model number of your printer is to find it

HP LaserJet... | Answered on Jan 15, 2014 | 28 views


Try using another cable and USB port on the computer.

HP LaserJet... | Answered on Dec 30, 2013 | 90 views


Check the troubleshooter for your specific model and see if it can help: http://downloadfreemanuals.com/category/hewlett-packard-manuals/

HP LaserJet... | Answered on Mar 05, 2014 | 77 views

Not finding what you are looking for?
HP LaserJet P2055d Printer Logo

181 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...