20 Most Recent HP LaserJet P2055d Printer - Page 4 Questions & Answers


hello,

first instal the software normaly if the software does not instal then start->run->cmd->run as:administrator ....password.write the path in the console then you can instal.

HP LaserJet... | Answered on Jun 12, 2012


Unfortunately, this is a common problem. I suspect you're using MS Word to make the labels. Word takes the font and the dimensions of the labels and is supposed to transfer the correct sizes of everything to your printer. All to often it doesn't do this correctly.
One thing to try is a couple different fonts to see what happens. (use plain paper to experiment, it's cheaper.)
The other way is to set up a regular page in MS Word with 3 columns and fill the page with copies of your information. The trick is to adjust the font size on the empty lines between your information.

address line 1
line 2
line 3
[font size adjusted empty line]
address line 1
line 2
line 3
[font size adjusted empty line]

HP LaserJet... | Answered on May 31, 2012


The drive laser printer is a black box mounted on top of your printer.
It is known as LSU, and then sends the image programmed into your CPU, this laser is responsible for sending the picture via mirrors and extenders your imagefile to the drum (included with your toner cartridge).

You can see the LSU removing the top cover of your printer, but you must firstremove the side covers and rear so that you can then see the screws to remove the top cover.

good luck

HP LaserJet... | Answered on Apr 30, 2012


The MS-office is corrupted in your computer. Try to reinstall or repair MS-office using the installation CD.

HP LaserJet... | Answered on Feb 03, 2012


USB device is malfunctioning, replace formatter..

HP LaserJet... | Answered on Sep 28, 2011


browse the link, check the internal parts 1 to 5
http://partsurfer.hp.com/Search.aspx?searchText=ce457a

HP LaserJet... | Answered on Sep 26, 2011


Most of the cases, power supply goes bad, open check the input fuse, if its open check primary section of the power section, replace defective components.. if power supply good replace formatter..

HP LaserJet... | Answered on Sep 12, 2011


well, someone has posted a possible solution here before. kindly click that link.
post back for followup

HP LaserJet... | Answered on Sep 09, 2011


As the output bin accumulates
paper, the output bin delivery flap
rises until a flag blocks the
photosensor (PS911). When the
photosensor is blocked, this
message appears.
Rotate the output bin
delivery flap up and down.
The flap must move freely. If
the top cover has been
replaced, make sure that it
has been installed correctly.

HP LaserJet... | Answered on Sep 05, 2011


Solution to the Problem

guilopmar_21.jpg

HP LaserJet... | Answered on Jul 13, 2011

Not finding what you are looking for?
HP LaserJet P2055d Printer Logo

181 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LaserJet HP

  • LaserJet HP

Most Popular Question

hp laser jet p2055d printer command

  • Office Equipment & Supplies
Loading...