20 Most Recent Sony Ericsson Cyber-shot C905 Cell Phone - Page 6 Questions & Answers

upgrade your window man

Hello Usually the SONY factory unlock code is 0000. Give that a try
Thanks the Projector Guy

Hello,

there is nothing wrong with your screen, the problem is from the flex that connects your screen to the phone's main board. This flex must have worn out that's why your screen is not displaying any picture.

The problem is common with flip and slide phones. The flex gets worn out as a result of constant opening and close of the flip or slide phone.

I would urge you to replace the flex and I am assuring you that your screen will display picture again. You might also be lucky to find out that the flex is not well fix, that is, it may have loosed contact.

If you cannot change the flex yourself, maybe you should take the phone to a local repairer within your vicinity, so that the flex can be fixed/replaced.

Good luck.

I had the same problem, blinking for no apparent reason. I shut off phone, removed battery, put battery back in, turned on. No more red light. Not sure if the charging routine gets stuck in some loop or what, where it doesn't realize it isn't charging anymore? I think it's supposed to blink while charging isn't it? Sure would be helpful if the manual said SOMETHING about it.

Because the settings for the sent messages on the message settings say you save a sent message. Its also like a backup just incase it is not delivered, you can go back and resend it. I dont see any harm.

ask the fellomate who sent it

hello, if you are still having the problem, i will repair it for you, for a charge for £25. Or im willing to buy the phone of you,
let me know, [email protected]

Hello,
I belive that the problem is that this an unlocked phone and the settings might have been changed. So the solution is for you to call your cell phone carrier and ask them for the settings and then it should work.

you should restore your phoen setting

my c905 keeps saying open lens cover when it is

If unlocking your phone is the problem then what you have to do is to Flash your phone from a software  
system so as to format the phone or factory setting to return to the way it is initially with out the code ok......



Kindly rate this solution........

Restore phone to factory default settings
Restoring your phone can be useful if you lend out the phone or just want to restore your phone to factory default settings and delete all user data.
To perform a master reset of settings and delete all settings and user data:

1. Select Menu > Settings > General (tab) >Master reset.
2. Select an option:
   • Reset settings:If you want to delete all user data, such as contacts, messages, and downloaded games.
   • Reset all: If you want to reset both user data and restore all original phone settings.
3. Select Continue > Continue.
4. The phone restarts.

Note: When making a factory reset of all content, you may lose content that was in the phone when you purchased it.

From every call? Well I think your phone that part is spoilt

That's a common problem.It may not be the problem of your ear piece.Try to use it on other phones.If it works then there are two possibilities
1.your ear piece socket is not working
2.your phone is not recognizing the ear piece.In this case reinstalling the firmware (from any service center) of your phone fixes the problem.

have a telstra sony erricsion c905 and ry to send multimedia txt and they just come up with queued anyone know???

google a programme called aerix

the easiest way to remove the sim card from this phone is by using a piece of scotch tape. place it over the end of the sim card sticking out and pull it will come

try to restore the settings of your phone