20 Most Recent Konica Minolta Magicolor 4690MF Multifunction Laser Printer - Page 8 Questions & Answers


Could be that the tab that acturates the sensor to tell the copier the door is closed is broken,check the door itself any damage to the tab or the senor the tab acturates is dirty or broken from its mount or bad

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered 2 days ago


Contact Konica Minolta directly to inquire.

Konica Minolta... | Answered on May 08, 2019


Check the drum and developer

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 07, 2019


Do you have a print controller IC 409 with this machine need to know prior to continuing to trouble shoot.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 07, 2019


Ram is located on the main body panel where is located the HDD.

Konica Minolta... | Answered on May 01, 2019


Have problem with the control board and image control boards

Konica Minolta... | Answered on Apr 28, 2019


Sir, Check the slit glass for the print head (LASER)

Konica Minolta... | Answered on Apr 28, 2019


have you check the wiring between the printer control board and the write unit may be pinched, if you have try all that mention above, better you try to replace PRCB.

Konica Minolta... | Answered on Apr 28, 2019


It on the control board in the rear

Konica Minolta... | Answered on Apr 27, 2019


menu
counter
display keypad
stop
0
0
stop
0
1

Konica Minolta... | Answered on Apr 27, 2019


FIXING ERROR

Konica Minolta... | Answered on Apr 23, 2019


need a developer or turn off press stoop button and turn on :) (it's a truble reset )

Konica Minolta... | Answered on Apr 22, 2019


you just turn it off at the main switch (or unplug from the outlet), wait 10 seconds and turn it on to reset the temporary user initiated lock out.

  1. if the tray cannot be opened the emergency open latch is via a hole on the rear of the large capacity tray. stick in something till you feel the lever, push it and the tray should open. If the tray for some reason (usually user error) has lifted all the way up and the drawer cannot open, well, your going to need a technician and an open checkbook.

Konica Minolta... | Answered on Apr 20, 2019

Not finding what you are looking for?
Konica Minolta Magicolor 4690MF Multifunction Laser Printer Logo

103 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magicolor Konica Minolta

  • Magicolor Konica Minolta

Most Popular Question

konica minolta 4690mf paper jams in adf

  • Office Equipment & Supplies
Loading...