20 Most Recent
Konica Minolta Bizhub C300 All-In-One Printer - Page 3 Questions & Answers
Administrator log in
1-Press "Utility/Counter button from control panel.2-Press "Administrator settings" from Touch screen LCD menu,3-Enter "Admin Password" which is 12345678.4-After entering the above password, press "ENTER" or "END" button, (appeared on top right side of menu).5-After pressing the end or enter button you will be in administrator mode.Now, if you are asking about the Administrator password, then the password is "12345678" This is the default administrator password of Konica Minolta bizhub MFPs and Photocopiers.For any other queries, feel free to ask any time.
This is a shared printer
You are set to print only black not colors.This is the reason.You are restricted to print colors.
I can't get my konica
First of all bring your machine on network.All you have to do is to just connect the network cable to it.Now press these buttons,Utility/Counter,Check details or details,Now select Administrator,enter admin password which is 12345678.Press enter.Now press NETWORK SETTINGS,In this option go to IPv4 setting. In this option enter IP address manually and put it on manual setting.Now press Details settings, then press Ping confirmation.Enter the IP which you want to ping and press Start button.This is how you can ping any ip address frm machine and bring your machine on network.
My bizhub c300 goes into
Increase its power save time.Go to utility/Counter, then press check details, then select administrator mode, then enter password 12345678, now in copier setting or in system setting increase the power save time of your machine.It will not resume again.
My Konica Minolta bizhub
C280
Simply uninstall the printer.Restart your PC.Now again install the printer.Use new driver instead of previous drivers.Ping confirmation from PC.Ping from Machine.If connection is okay then there is no need to reset the machine.There is network problem.
How to insert envelope in
To insert envelope for printing use manual by pass tray.Manual by pass tray is at the lower left side of machine.Insert envelope there and start printing.Also check the pressure lever in fixing unit.Make sure it is set on envelope printing setting.
Error 2557
ATDC Gain abnormality.Automatic toner density control error.Go to tech rep mode and simply increase the sensor gain and restart the machine.
Not finding what you are looking for?