20 Most Recent Canon PIXMA iP4600 Color InkJet Photo Printer - Page 8 Questions & Answers

the heads are clogged. try to clean it using the software with the printer. do it up to 3 times to see if there are improvements. if not, buy 1 of those water based solutions you can get on a a store like officemax etc. this normally happens if the printer has not been used for a while.

Just follow these steps to fix this,

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

open the cartridges may be stuck off and installed
first is printer is good ofter prin out coming

I hope this video will help you,
Good Luck.
Thanks for using FixYa.

Have you replaced the inks friend had same problem ink was'nt seated right took them out and refitted them error vanished.

Just follow these steps to fix this,

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Hope this helps. Please rate my response.
Thanks.
Have a good day.

waktu ngeprint bunyi keras sekali trus error

HI:

ABAUT ERROR 5B00 4700

CAN YOU HGELP ME

WE CANOT BUY THIS SOFT WEAR

I DONT HAVE MASTER CARD OR ...ACOUNT

BECAUS I FROM IRAN



i need free link for this soft wear .
plz help .
"Service Mode Tool Version 1.050"

this softwear resset counter for printers ip 4700 models AND ERROR 5B00


my id: [email protected]

privait email: yousefi @ emc.ir
plz send links or rar fils to my email or yahoo id


have good time


tanx for all

Click on Printers and faxes on the start Menu. Right click the printer on the display screen. On the drop down menu select Printing preferences. A box will be displayed with tabs. Select page set up. Check the the Duplex Printing box. Apply and press OK. The printer will first print one side of the page and then ask you to reverse the page. All this will be displayed on your computer screen.

If your Canon printer is capable, its called Duplex printing. You would go into the properties of your printer and if its available there then you can check it off and it will print on both sides of the paper.

Hi there
I have put 2 files on my website for you 2 try out, they are the tools program that you use for resetting the waste ink pads and resetting inks ands so on for your printer.
You may have to try the 2 see what one will work for you,
Most IP-Tools will some times work for lots of printers.

Click Link = http://www.4all2sell.com/reset-tools/iPTool.exe

Click Link 2= http://www.4all2sell.com/reset-tools/iPTool.zip

Ones you have downloaded just double click on it to run it.
One of the files is in a WinZip format so if you not got WinZip on your PC you can download free from this Link = http://www.winzip.com/trialpay.htm

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks All files on my website are only there for a limited time.

I'm not really sure what "surendrapell" was trying to say here, but the following expert "pineworks" on fixya resolved this problem for me completely.

Here is the link: http://www.fixya.com/support/t4097826-aborber_full_error_message

I had this same problem, too, and tried to fix it for about three months and couldn't. I had to keep restarting and unplugging the printer, over and over... then back to Error 6C10 again. I finally found this suggestion by "pineworks" that has resolved this completely for me. Hope this helps someone else:

what do you mean by reset? you mean resetting the device to it's factory settings or resetting it to recognize the refilled cartridge? if it's second one it can be a problem, because as far as i know the new line models (such as 4600) has different chip inside the ink cartridge and because of that fact there's still no resetter for the new models. you can try holding the resume button for a few seconds after inserting the cartridge but i doubt it will do the work. i will ask my friend 2moro and will report back

you can push the power botton in atlist 10 second and can be reset the canon ip 4600
i hope i can solve your problem

Many ink suppliers can supply you with replacememnt chips or a reset tool. You may need to call a few before one will be willing to sell these to you but yiu will find them eventually.

1.remove the waste ink pad,and wash with water
2.Down load the free "ssc service utility" software (help of google search)
3.install the downloaded software in your system
4.then reset all chips using the software(especially counter chip)
5.now the printer will print properly

Place one chip in at a time,the printer will automatically detect what colour it is. When it tells you what colour it is, place the chip in the designated holder.