20 Most Recent Canon PIXMA iP4600 Color InkJet Photo Printer - Page 2 Questions & Answers

goto > http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=17105

Enter the Operating system.

Download the new driver

ink absorber is full ip3680 solve

The print head is lockedfeed a piece of paper through the back and manually turn the white roller until the paper is 3/4 through. Turn the printer on and the printer should take the paper and run it the rest of the way through.

check printer usb cable?

Verify the ink cartridges and perform the mantenance head cleaner mode.

I have the same issue with that the black won t print

It turns out that if you read the documentation VERY carefully it says that "if the application program specifies 8.5x11 plain paper and that is what is loaded in the front cassette you cannot print from the rear tray". It turns out that this is true even if you go to the printer driver and specify "rear tray" manually. The driver disregards the setting. You can force printing plain paper from the rear tray by going to the Canon "My Printer" icon and forcing ALL printing from the rear tray. If you do this, remember to change it back. You can also print plain paper from the rear tray if you specify the "allocation" option and the paper from the front cassette runs out. You can always print from the rear tray if the application that created the print job specifies something other than 8.5x11 without resorting to the forced override, e.g. printing a .jpg or .gif or something from an application like Paintshop or Printshop, etc.

Fixing "Error code 6c10? in your Canon MP 620 printer is easy. For this you need to turn your printer off. After this you can press and hold the 'Resume' Button. While pressing the 'Resume' button, you can turn off your Canon MP 620 printer. The green led of your printer should go on as you are holding the Power button; release the Resume Button. Now after that you need to click on the 'Resume' button twice and release both buttons without releasing the Power Button. Now you click 'Resume' four times then click 'Power' button to confirm the selected action. Finally you must turn your printer back on.

It's probably a waste absorber issue.

A fix from FixYa Support:

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again
http://www.fixya.com/support/t5998845-error_code_6c10_mean

Hope this helps.

You need to replace the ink absorber and reset the error code by following the reset procedure:Resetting error 6c10

6C10 means you need to replace the ink absorber. After this it require to reset the error. Reset 6C10