20 Most Recent Canon ImageCLASS MF4350d Laser All-in-One Printer Questions & Answers

the free nemo pdf to word converter could help you solve the problem.

1. Press [Job Cancel/Status Monitor] repeatedly to select

1. Press [Job Cancel/Status Monitor] repeatedly to select

hello friend, you can find the canon mf4350d service manual in below link: Canon i-Sensys mf4350d service manual: http://goo.gl/JVio9z thanks

This means the scanning lamp (AKA the CIS unit) is bad and needs replaced. It would be advised to either take it into a shop or replace the All-in-one printer, but if you insist on doing this yourself:
http://www.copytechnet.com/forums/canon/56579-canon-imageclass-mf4150-scanner-lamp-e225-consistent-behavior.html
I hope this was helpful and thanks for using Fixya!

Sir, there is an error i.e system error e225 in display my canon mf 4350d machine please help me shut out this problem

please explain your doubts. This is not enough.

system error e225

Open the scan gear mechanism and reinstall the gear mechanism with good lubricantsReplace or clean the sensors and motor mechanism.

verify your paper setting is set to inch and not metric otherwise known as a4 vs letter

Dear Biswabhusan It is due to the problem related with CIS. Pl. check the cis cable/cis and its home position sesor ,its a plasti strip white color just above the cis home position and its attached to the platen glss. Thanks.

Toner Cartridge is the most common cause of squeaks and easiest thing to try first. Try a different cartridge.

Without removing the cover itself you really cannot be sure it is totally clear