George Foreman GGR50B Grill - Answered Questions & Fixed issues

could be a circuit protection device check correct battery voltage selected check correct t battery post connection positive to positive -negative to negative check that the clips are on the battery posts as there may be a build up between the posts and the terminals that is causing the charger to overload or sense an open circuit because of the high resistance

Hi, you can purchase on amazon . Amazon com George Foreman Grill parts. If can't find exact part, contact any vendor (probably someone can provide parts) Hope this was helpful.

try e spares on the internet for one

http://www.directpartsandproducts.com/george-foreman-parts-accessories-indooroutdoor-grills-c-61_171_1017_1144.html

Hope this helps! And one previous poster inverted the phone number. It's 800-738-0245. But you should be able to order online through the posted website.

Replacement Power Cord with Temperature Control can be purchased from the links below.

http://www.partstore.com/Part/Applica/George+Foreman/1021K215BPJG2C0A1/New.aspx

http://www.directpartsandproducts.com/advanced_search_result.php?keywords=1021K215BPJG2C0A1&x=18&y=14

http://www.appliancefactoryparts.com/gasgrillparts/helpcenter/breakdowns/george-foreman/george-foreman-ggr50b.html

Good Day Gfranks100!

Is it correct that you are looking for a replacement handle for a George Foreman GGR50B Grill?

If not, please state here the brand and model of your grill so we could refer you directly where to purchase the part.

Replacement parts for the GGR50B are available online from the following site:

http://www.directpartsandproducts.com/indooroutdoor-grill-ggr50b-c-61_171_1017_1144_1146.html

If you do not see the part you need, suggest you contact this supplier at 800-738-0245 or via their webform to see if they are able to source for you.

To first sear the steak on both sides, turn it to it's highest setting. After both sides have seared for about 3-5 minutes per side, depending on the thickness. Then turn the temp down to medium and continue to grill to the way you like it turning it once more. Never use a fork to turn the meat. It pierces it and allows those wonderful juices to drain out. Use tongs instead. Once it's cooked to your liking, take it Off the grill and allow it to rest 3-5 minutes. That way, when you cut into it, most of those wonderful juices will remain in the meat.

Hope this helped you and enjoy your steak! Happy grilling!

Absolutely, not.

take the grill apart and remove the old wires ( label and mark colors ),, go to your local hardware store and buy a pre made plug and wire set and install to the grill.
now depending on where the cord got burned -- you can just shorten the cord and use the existing cord -- ( it will just be a bit shorter ).
you can also use a extension cord and just cut the one end off of it and wire that to the grill.
or you can just cut the burned through part off and use **** connectors to put it back together.

c...

here is a free link to the manual.

http://www.appliancefactoryparts.com/content/pdfs/123576-1.pdf

Have a great day!

There is no reason why you cannot use your grill if scratched. If the scratch is on the cooking surface and some of the no-stick coating has been removed then this may cause your meat to stick to that particular area. This problem should not be of any concern regarding the use though.

Here is a link to the Fox Parts store where I found a replacement probe at a very reasonable price ($25.00) and with free shipping! http://foxpartstore.com/p-7346-1021k215bpjg2c0a1.aspx

If it turns out that you need a new cord/probe set here is where I found one for $25. (And, with free shipping! )http://foxpartstore.com/p-7346-1021k215bpjg2c0a1.aspx

'very Helpful!

The Temperature Control Probe and the
Grill shipped to San Francisco is about $54.
Unreasonably expensive.

http://dl.owneriq.net/e/efa517ea-1825-4a8e-9650-30035e67e562.pdf

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

aluminum foil may take the teflon coating off if it scratches it. I wouldn't use aluminum foil, parchment paper would work

If it's only a prong that broke, go to a hardware store and buy a replacement plug.

why? what is wrong with cleaning existing one? just remove it, heat it on topstove a bit, then tip content to any plastic dish, you can use this fat as add-on for your dog or cat, mix wiht seeds and give to birds, in local park or indeed on your veranda or balcony, does not need to go to the tip.