20 Most Recent
eMachines T6211 PC Desktop - Page 8 Questions & Answers
Why is my e-machine giving me 4 beeps and wont boot up?
Usually 3 or 4 beeps in a row on many systems is a RAM issue.
If you have multiple RAM sticks try to remove one while the system if off and unplugged. Turn it on and see if the beeps continue. If so, remove the other ram stick and put back in the first stick you removed.
Repeat the process for each stick of ram until the beeping stops.
If it stops, this means you have found the bad ram module and can replace it.
Some computers requires ram to be installed in pairs, and that the pairs match (Check the stickers on the ram to ensure both are the same type and speed)
If the problem continues after removing and testing each stick of ram, you may want to have a service professional / Computer Repair shop take a look at the computer for further testing.
9/6/2014 3:55:48 AM •
eMachines...
•
Answered
on Sep 06, 2014
Hash key
Hash key location will depend on language you're set up for. My keyboard has the hash on a shifted "3". "#"
9/4/2014 12:00:52 AM •
eMachines...
•
Answered
on Sep 04, 2014
F12 boot
Once black "highlighted" press enter.Options to enable or disable will appear.
8/31/2014 3:13:40 AM •
eMachines...
•
Answered
on Aug 31, 2014
Why password is not accepted
1. Password incorect- try to key in another one.
2. Caps Lock is ON or OFF. Try to remember is there any CAPITAL letters involved.
3. For God's sake stop spying on your fiance, and leave her(his) computer alone! :D
8/17/2014 3:03:29 PM •
eMachines...
•
Answered
on Aug 17, 2014
Have emachines monitor which is not coming on power button fast flicker
Which power button is flickering (your computer, or your monitor).
Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.
Good luck.
8/4/2014 12:04:55 AM •
eMachines...
•
Answered
on Aug 04, 2014
Our monitor on/off button is not working well. sometimes it won't turn on, other times the blue halo flashes on and off. is there a simple solution or is it just failing?
Check all connections.
Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.
Good luck.
7/30/2014 3:33:09 PM •
eMachines...
•
Answered
on Jul 30, 2014
Can video card be upgraded in emachine el1358g-51w
yes you can upgrade the graphics card, you have integrated graphics but you can purchase a PCI-E graphics card and bypass the on board graphics but keep in mind you'll have to buy a "low profile" graphics card as there's not much room in your case and a full size card will not fit.
7/1/2014 4:17:59 PM •
eMachines...
•
Answered
on Jul 01, 2014
Not finding what you are looking for?