20 Most Recent eMachines T6534 PC Desktop - Page 5 Questions & Answers

Make sure your installing the right windows either 32 or 64 bit windows.you can't install a 64 bit system on a 32 bit if it doesn't support it.

microsoft has a license type called OEM which detects the computer that it is installed on and some computers have the licence key stored in the bios of the computer. So when you grab the old hard drive and put it in the next computer Windows will detect you changed computers and not run as per OEM licensing rules that it runs on only the original purchased computer. You might be able to run the drive as a secondary drive but you would need to install a new windows operating system and hard drive. And then use a partioning program to make the secondary drive not an active drive. also you new machine most likely has a different type of bios called EFI and you would have to change its settings to run AMI Bios but I do not think that is your problem as I think it is OEM but it might be worth investigating if you can run a legacy bios in the bios settings.

Hi there. If your desktop has been overheating for any reason you will need to look at buying a new processor (cpu), power supply (if wires have been damaged from heat or voltage spike), or possibly a new motherboard. It would be advisable to have a computer shop look at the internal components of your desktop. Heat or a surge in power can damage the computer hardware. Good luck!

hello and good morning. emachines are old and now owned by acer.com (gateway,etc) they OWN many old names. you are running XP right? the last man on earth to do so? XP is a virus magnet and doomed, it is time to upgrade. this PC is 2007 made. so is 12 years old, today.. the RTC coin cell battery will be no good now, replace it for $2 then reset BIOS inside BIOS screen " set default" then test the HDD, to be sure it is ok, if not? then reloading any OS of any kinds is not going to work with any bad HDD. Last, reload a new OS. there are the steps. and can be expensive, spent on any PC this old with zero street value. ($0 if broken a it is)

http://www.emachines.com/ec/en/US/content/drivers.html

https://www.wimsbios.com/biosupdates/emachines/emachinesD525

You'll have to unsolder the entire battery holder and replace it with a new one. Not suggesting you try it unless you have the proper desoldering equipment. Otherwise, damage to the motherboard will result

Do you have the recovery disk set?

If you can boot into Windows 8

1. Power on your computer.
2. Press the Windows and C key to begin a search.
3. Type recovery and click eMachines Recovery Management.
4. Click on Restore Factory Settings, at the Restore tab from the left menu.
5. Click Next.
6. Click Fully clean the drive option.
7. Click Reset.

More items...

eMachines Recovery Disk - Guide for Windows XP, Vista, 7, 8

How can restore eMachines W3650 Google Search

If you can boot into Windows 8

1. Power on your computer.
2. Press the Windows and C key to begin a search.
3. Type recovery and click eMachines Recovery Management.
4. Click on Restore Factory Settings, at the Restore tab from the left menu.
5. Click Next.
6. Click Fully clean the drive option.
7. Click Reset.

More items...

eMachines Recovery Disk - Guide for Windows XP, Vista, 7, 8

How can restore emachines EL1358G 51W Google Search

If you can boot into Windows 8

1. Power on your computer.
2. Press the Windows and C key to begin a search.
3. Type recovery and click eMachines Recovery Management.
4. Click on Restore Factory Settings, at the Restore tab from the left menu.
5. Click Next.
6. Click Fully clean the drive option.
7. Click Reset.

More items...

eMachines Recovery Disk - Guide for Windows XP, Vista, 7, 8

Rebooting used emachines laptop Google Search

pull the cmos battery or use jumper to reset the bios

What do you mean it does not bring up the monitor?

please follow the instructions given on the link below https://neosmart.net/wiki/emachines-recovery-disk/

Usually no. These boards are made specifically to go with the case of this model. Notebooks are like that too. Sometimes there are similar models with better components that could fit, but its hard to know.