Top 20 eMachines W3507 PC Desktop - Page 5 Questions & Answers

If you can boot into Windows 8

1. Power on your computer.
2. Press the Windows and C key to begin a search.
3. Type recovery and click eMachines Recovery Management.
4. Click on Restore Factory Settings, at the Restore tab from the left menu.
5. Click Next.
6. Click Fully clean the drive option.
7. Click Reset.

More items...

eMachines Recovery Disk - Guide for Windows XP, Vista, 7, 8

Rebooting used emachines laptop Google Search

pull the cmos battery or use jumper to reset the bios

If you can boot into Windows 8

1. Power on your computer.
2. Press the Windows and C key to begin a search.
3. Type recovery and click eMachines Recovery Management.
4. Click on Restore Factory Settings, at the Restore tab from the left menu.
5. Click Next.
6. Click Fully clean the drive option.
7. Click Reset.

More items...

eMachines Recovery Disk - Guide for Windows XP, Vista, 7, 8

How can restore emachines EL1358G 51W Google Search

moved you out of monitors and into laptops, only forum. emachines full model not old like this example E525-901G1Mi windows 7 loaded day1.

• the switch is bad Lid close switch
• set wrong in power settings.
• or the driver is missing that makes this switch work.

so why not just assign the sleep mode, to auto sleep then on what does the power button do in settings, set to do nothing or set button to only sleep . (3 choices here) or let auto sleep do the work, set. set to say 5min idle. the switch is inside it deep and if you rip it out as you go there most noobs break 2 or 3 FFC cable jacks and now it is bricked and $300 mobo wrecked emachines or junk grade, made by Acer.com owned now and that maker does NOT have service manuals making service a royal Pain. best is work around the problem as I just told how. or ask any shop to fix it. they do know how.!!!

If you can boot into Windows 8

1. Power on your computer.
2. Press the Windows and C key to begin a search.
3. Type recovery and click eMachines Recovery Management.
4. Click on Restore Factory Settings, at the Restore tab from the left menu.
5. Click Next.
6. Click Fully clean the drive option.
7. Click Reset.

More items...

eMachines Recovery Disk - Guide for Windows XP, Vista, 7, 8

How can restore eMachines W3650 Google Search

Make sure your installing the right windows either 32 or 64 bit windows.you can't install a 64 bit system on a 32 bit if it doesn't support it.

What do you mean it does not bring up the monitor?

please follow the instructions given on the link below https://neosmart.net/wiki/emachines-recovery-disk/

Usually no. These boards are made specifically to go with the case of this model. Notebooks are like that too. Sometimes there are similar models with better components that could fit, but its hard to know.

Please contact emachines product support, fixya is not that company

I doubt that your laptop is actually broken. Can you give some more details.- What's the model ? HP Pavilion xyz320 ?? I may be able to give you the code to put into unlock it. Thanks Doug

why play around in the bios leave it alone. its there for a reason. if dont know what your doing you totally fff your pc. stay out. this is comming from someone that has built a lot of pc's in the past stay out.

Their may be a built in utility to within the windows environment to start the recover. Wold you like some remote assistance and I would be happy to check it out for you? Andy

usually under the front edge

normally one on the cpu then two in the case front and back. sometimes they have a tube or funnel over the cpu with a fan. Others have liquid tubing to keep cpu cool.

Green plug is for mouse Purple plug is for Keyboard Blue plug is for Monitor Pink plug is for Scanner (not useually used anymore) The thin skinny ones are USB The one that looks like phone cable is LAN (Network) round green one is speakers

The problem is in the graphics card. If the monitor connects to the onboard video circuits, them you'll need to replace the motherboard.

1. CPU Power Cord
2. Monitor Power Cord
3. Monitor video cable
4. Mouse w/cable (unless wireless)
5. Keyboard with cable (unless wireless)
6. Network cable with 8P8C connectors (unless wireless)
7. Speaker audio cable (unless internal or no speakers)
8. Speaker power cable (unless CPU powered or no speakers)

your husband really did a job now you can do a job change to a service provider that works well and then get in a IT geek to set it all up for your It may cost a dollar but once set up , it will not need touching