Top 20 eMachines W3507 PC Desktop - Page 3 Questions & Answers

0helpful
2answers

I deleted something in the windows task manager

Use your OS disc and reinstall the system software...
11/27/2009 7:51:16 PM • eMachines W3507 ... • 33 views • 0 helpful votes
0helpful
1answer

No audio

if your pc does not have audio there are usally only two reasons 1) bad sound driver 2) BAD sound card. youcan go to the manufacturers web site to download the latest driver for your machine if that doesnt work try windows update. Sometimes Windows update has hardware updates.If that fails buy a new sound card.
9/24/2009 6:42:07 PM • eMachines W3507 ... • 127 views • 0 helpful votes
0helpful
1answer

Can anybody help me plz

depends on what you want
11/4/2009 2:27:24 AM • eMachines W3507 ... • 30 views • 0 helpful votes
0helpful
1answer

I don't really have a problem I just want to

Here are the tips on how to upgrade and support to you CPU.

The 8400GS isn't much better than the onboard graphics in your Emachines, and the 7200 is NO better than your onboard.

If you want a noticeable improvement in performance, get at least a 9500GT, which is the highest card your Emachines can run on its stock power supply.

Any card more powerful than that, you are going to need a new power supply.

This 9500GT is below $50: http://www.tigerdirect.com/applications/…


RAM Memory Upgrades
1 GB 240 Pin DDR-2 667MHz (PC2-5400) 512MB 240 Pin DDR-2 667MHz (PC2-5400)

Hope this helps.

Please rate me if i am helpful to you.
Thank you.

Yboyandrei
8/19/2009 12:46:52 AM • eMachines W3507 ... • 150 views • 0 helpful votes
0helpful
1answer

Ethernet controller drivers are missing,,,

Hello. Try this link. http://support.gateway.com/support/drivers/search.asp?ref=step&st=browse&platform=10021&model=12306&os=10406&type=10095 Let me know if it workd
6/15/2009 2:07:23 AM • eMachines W3507 ... • 294 views • 0 helpful votes
0helpful
1answer

Saying the f11 botton is missing on the login page

Try reformating Windows. If you have info on your computer that you need, you can alwats try to repair your computer from safe mode.
6/16/2009 8:40:32 PM • eMachines W3507 ... • 92 views • 0 helpful votes
0helpful
1answer

Upgrade problems

Your system comes stock with one stick of DDR2 (512 MB), which means that it is _ not_ dual channel DDR2 memory as dual channel DDR2 must be installed in matched pairs. Try to exchange the new memory for 2G of some single channel DDR2.
1/28/2009 12:35:08 AM • eMachines W3507 ... • 358 views • 0 helpful votes
0helpful
1answer

Restore disks

Does not seem to be one available,art least not from the website.
Have you tried a restore to the earliest date? There is a contact phone number on theire website. Another option is to purchase an Win Xp disk.

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=W%20Series&model=W3507
1/19/2009 12:43:35 AM • eMachines W3507 ... • 166 views • 0 helpful votes
0helpful
1answer

My emachines t5212 will not find a wifi hotspot

Your desktop computer does not have a wireless adapter.
3/9/2014 6:16:46 PM • eMachines W... • 73 views • 0 helpful votes
0helpful
1answer

What is the emachine w 3502 amd chipsets?

What's plugged into it?
3/28/2014 9:09:14 PM • eMachines W... • 43 views • 0 helpful votes
0helpful
1answer

How to remove panel (back or front) from W3503 emachine

The manual is at... http://www.manualslib.com/manual/46776/Emachines-13.html?page=4&term=panel&selected=0 See page 46 "Removing the side panel".
1/6/2014 4:38:22 PM • eMachines W... • 118 views • 0 helpful votes
1helpful
2answers

W3502 emachine SM Bus Controller driver

Looks promising. It's an INF fie which are driver files. Download, extract, and direct Device Manager where to install driver from. The worst that can happen is it won't install, or you have uninstall / delete. Better than those fake drivers you mentioned.
12/1/2012 4:25:18 AM • eMachines W... • 555 views • 1 helpful votes
0helpful
1answer

Emachine 1641-02w the monitor will not lite up the monitor is good because tried it on another computer

Check cables, connections, pins, If you have a Graphics Card, reseat it. Sound like a connection or graphics issue. Do you have a can of Electronic's Contact Spray? I use it for cleaning connector, PCI slots, etc., Where copper connections oxidation occurs. May be a simple reset or bad Graphic Card. Hard to say for sure.
12/16/2012 7:40:26 PM • eMachines W... • 46 views • 0 helpful votes
0helpful
1answer

How Do I download

10/13/2012 3:01:01 PM • eMachines W... • 79 views • 0 helpful votes
0helpful
1answer

I can't get emachines internet. how can i do it?

1) you must sure the Internet is working o.k 2) see if the modem LEDS are working good3) if you have Router see if the router is working with the LEDS, and see you have another computer connect and see if working.4) if additional computer is working the problem will be your computer PC.5) try to restore to some point when was working before.6) see if this work, otherwise you must download the driver for NIC NETWORk , BIOS+CHIPSET go to the supplier web and download.God bless you
9/27/2012 6:17:02 PM • eMachines W... • 84 views • 0 helpful votes
0helpful
1answer

E machines w 3623 wont boot windows 7 fresh install

Did you check W7 compatibility before install? It is likely that your low-end RAM-based graphics was a bust.
10/27/2012 6:00:02 AM • eMachines W... • 35 views • 0 helpful votes
0helpful
1answer

I restored my emachines computer back to factory setting using the disk that came with it and now when I try to download a CD it says

i assumed your os is window xp....try this steps;1. right click on my computer, left click on the properties2. select the advanced tab, under performance click settings3. on the advanced tab, under virtual memory click change4. Under Drive [Volume Label], click the drive you want to change5. Under paging file size for selected drive, select the custom size6. type 384 in the initial size (mb) text box7. click set and then ok 8. close the dialog and restart i hope this help.
6/13/2012 1:57:02 PM • eMachines W... • 121 views • 0 helpful votes
0helpful
1answer

I need a W2040 motherboard wiring diagram

must be easier to move the hd to a hd-caseing and start transfer to a another computer......to much time-consuming.
3/27/2012 1:11:36 PM • eMachines W... • 671 views • 0 helpful votes
0helpful
1answer

Internet Exployer keeps crashing & I don't know what else to do.

We had a problem like this with one of our PCs and it was a very nasty virus that needed specialist help, they had to reload all the software. Suggest you get access to another PC and find out if it is a virus. Sorry!
5/19/2012 8:58:12 AM • eMachines W... • 81 views • 0 helpful votes
0helpful
1answer

Emachines T5274a desktop computer have wifi

Most desktops do Not have wifi built in and specs for this unit do no show wifi , you usualy need to add a wifi dongle in a usb port or add a card.
2/17/2012 9:07:43 PM • eMachines W... • 255 views • 0 helpful votes
Not finding what you are looking for?
eMachines W3507  PC Desktop Logo

Popular Tags

66 questions posted

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

Andrew Chrostek
Andrew Chrostek

Level 1 Expert

187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

W eMachines

  • W eMachines

Most Popular Question

computer starts shuts down

  • Computers & Internet
Loading...