20 Most Recent Apple iPhone 3G Black Smartphone - Page 4 Questions & Answers

ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will SolvedIf For puk & pin cod problem So PleaseVery Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office opratorEnter The Puk code and YesEnter The pin code and YesSo Puk code Open and Problem will Quickly Solved

Brother Please try it:ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will SolvedIf For puk & pin cod problem So PleaseVery Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office opratorEnter The Puk code and YesEnter The pin code and YesSo Puk code Open and Problem will Quickly Solved

Very Best:My dear:Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office opratorEnter The Puk code and YesEnter The pin code and YesSo Puk code Open and Problem will Quickly SolvedBut:Don't try to enter a PUK code without knowing the right one.You need to call your service provider to get this code. It can be as many as 8 digits, and it is random. If you enter too many wrong codes, you can permanently damage the device. So Please You Go to Service officeand Get the Duplicate Sim From Office Oprater Same Your No Problem will Solved

You will probably need to reboot into recovery mode and restore your phone. To get into recovery mode, make sure your phone is connected to you computer via usb cable, then you need to hold down the sleep button and the home button down at the same time for 10 seconds then release the sleep button. Continue holding the home button down until iTunes detects a phone in recovery mode, once it's in recovery mode you can press the restore from within iTunes.

YOU NEED TO RETURN THIS PHONE TO ITS OWNER. YOU CAN TURN IT IN AT ANY APPLE STORE. PEOPLE HAVE HAD THEIR PHONES TRACKED SO YOU BETTER DO THE RIGHT THING.

This is a step by step guidehttp://www.ifixit.com/Guide/Installing+iPhone+4S+Battery/7111/1

Hi!

If your screen is not having a crack on it then there is a possibility that it can work again.

But if it has a crack then you need to buy a new screen.

Hope it helps..

Thank you for reaching Fixya.

Please leave comments for further assistance.

Have you tried plunging it into your computer and getting the latest OS update? I’m happy to help further over the phone at https://www.6ya.com/expert/joshua_ac64e182ed26f66d

need to restore in itunes\

hi,
basicly you need to do a software restore or update on your Iphone. When using Itunes 8.2 you can just select your Iphone and in the summary select either restore or update. I would recommend that you update it seeing that the software version 3 does allow mms

Hi, You can unlock your iPhone 3G by Remote unlocking. The unlock is permanent and you can get this unlocking service from online sites. Unlocking4u.com is where i unlocked my iPhone, Check it out!! Hope this helps you!!

Reset the iPhone:
It has been observed that simply resetting the iPhone can resolve signal strength issues.
Reset network settings:
In some cases resetting the network settings has also helped so tap Settings, tap General, tap Reset, tap Reset Network Settings.
This will restart your iPhone and will also delete any stored Wi-Fi passwords as well as DNS settings and more.

Place your SIM card again:
If your iPhone’s SIM card is not placed properly, it has been observed that it can affect signal strength.
So a good idea would be to remove your iPhone's SIM card by pushing a straightened paper clip into the small hole on the top of the device to open the SIM tray, then check for debris inside the tray or SIM card slot, remove it by blowing into the slot or using compressed air and then placing the SIM card properly and then re-inserting the SIM tray.
The notion is that improper SIM contact can result in a weak signal, so the above procedure could help.
Attaching scotch tape to the SIM card:
This is indeed the most ingenious methods, it appears that attaching a small piece of scotch tape to the outer side of the iPhone’s SIM card (the side of the SIM card that does not have metal contacts) can result in a surprising boost again borrowing from the notion that improper SIM contact can result in a weak signal.

go to settings/general/date&time/set date & timeif you can't see this option then you should choose 'OFF' on the "Set Automatically" option.

you have to activate it through iTunes first using the orginal sim card

for sending text messages :1.go to your message settings and check the message center number to see if it is correct2. call to your network operator customer care3. request the message center number...4.note it down5. go to message settings>message center number6. insert the number which is noted by you and save itthis solves your messaging problem ...Good luck

I-phone 3G,3GS are latest Phone..You can unlock it using the Remote Unlock service.....Get the Remote Unlock service at reasonable cost from the site Prounlocking and unlock it....I have unlocked it using the Remote unlock service...Free Unlock is not possible to get for the I-Phones.

pls change the simcard and check it

follow the instruction on www.iclarified.com