Top 20 Haier HTQ21JABRS Top Freezer Refrigerator - Page 2 Questions & Answers

Not that I’m aware of. Either move it inside or heat garage.

If the ice tray in your Haier refrigerator is stuck and you're unable to release it from the fridge, there could be a few different issues causing the problem. Here are a few things you can try to fix it:

1. Check the ice maker arm: Make sure the ice maker arm is not stuck or broken. If it is, it will need to be repaired or replaced.
2. Check the ice maker mechanism: Make sure the ice maker mechanism is not jammed. If it is, try to unjam it by gently pushing or pulling on the tray.
3. Check the temperature: Make sure the freezer temperature is cold enough for the ice to freeze. If the temperature is too warm, the ice will not freeze properly and may become stuck in the tray.
4. Check the water supply: Make sure the water supply to the fridge is turned on and that the water supply valve is not closed or clogged.
5. Check the water filter: Make sure the water filter is not clogged. If the filter is dirty, replace it with a new one.
6. Gently try to move the ice tray by pushing or pulling, if it still won't come loose, it may be best to contact the manufacturer or a professional for further assistance.

Please note that some models of the refrigerator have a release lever, check the owner's manual to locate it.

If your Haier refrigerator is running but not getting cold, there could be a few different issues causing the problem. Here are a few things you can check:

1. Check the thermostat: Ensure that the thermostat is set to the appropriate temperature. If it is set too low, the fridge will not cool properly.
2. Check the condenser coils: The condenser coils may be dirty or clogged, preventing the refrigerator from cooling properly. Clean the coils with a brush or vacuum.
3. Check the door seal: Make sure the door seal is tight and not damaged. If the seal is not tight, cold air will escape and the refrigerator will not cool properly.
4. Check the evaporator fan motor: If the evaporator fan motor is not functioning properly, it could cause the refrigerator not to cool.
5. Check the compressor: If the compressor is not functioning properly, the refrigerator will not cool. It may need to be replaced by a professional.
6. Check the refrigerant level: If the refrigerant level is low, it can cause the cooling system to fail. This is a job that should be done by a professional with the right equipment and experience.
7. Check the defrost system: If the defrost system is not working properly, the evaporator coils will frost over and the refrigeration will not work.

Please note that it's also possible that there could be other issues causing your refrigerator not to cool, so it may be best to seek the help of a professional if the above steps do not resolve the problem.

Unplug for a day then plug back in. If it won't start it's probably the compressor overload

search google for the manual. with the model number such as WDNS116BBS https://www.manualslib.com/manual/64253/Haier-Wdns116bbs.html

If your Haier HRF15N3AGS refrigerator's electronic door panel is beeping and switching back and forth between 0 degrees and 37 degrees after the fridge door is opened, there could be a few different issues causing the problem. Here are a few things you can try to fix it:

1. Check the door switch: Make sure the door switch is properly aligned and not damaged. The door switch is responsible for detecting when the door is open or closed and can cause the panel to malfunction if it is not working properly.
2. Check the sensor: Make sure the temperature sensor is properly placed and not damaged. The sensor is responsible for detecting the temperature inside the refrigerator and can cause the panel to malfunction if it is not working properly.
3. Check the control board: If the above steps do not resolve the problem, the control board may be faulty and will need to be replaced.
4. Check the power supply: Make sure the fridge is properly plugged in and that the outlet has power.
5. Check the settings: Make sure the temperature settings are correct and not accidentally changed.

If you are not familiar with any of these steps or if the problem persists after trying these solutions, it's best to contact the manufacturer or a professional for further assistance.

It sounds like your Haier refrigerator is having an issue with the compressor and cooling system. Here are a few things you can check:

1. Check the thermostat setting: Ensure that the thermostat is set to the appropriate temperature. If it is set too low, the fridge will not cool properly.
2. Check the compressor: Make sure the compressor is running and not too hot to the touch. If the compressor is not running or is hot, it may be faulty and will need to be replaced.
3. Check the compressor overload protector: The overload protector may have tripped, check to see if it is tripped and reset it if necessary.
4. Check the compressor's capacitors: They could be damaged and need replacing.
5. Check the evaporator fan motor: If the evaporator fan motor is not functioning properly, it could cause the refrigerator not to cool.
6. Check the defrost system: If the defrost system is not working properly, the evaporator coils will frost over and the refrigeration will not work.
7. Check the power supply: Make sure the fridge is properly plugged in and that the outlet has power.

If you are not familiar with any of these steps or if the problem persists after trying these solutions, it's best to contact the manufacturer or a professional for further assistance.

Unplug & leave disconnected from power for a few minutes then replug in refrigerator & see if that restores the display.

It's possible that the compressor in your kegerator is shot and will need to be replaced. However, there are a few other things you can check before determining that the compressor is the issue.

1. Check the power supply: Make sure the kegerator is properly plugged in and that the outlet has power.
2. Check the thermostat: Ensure that the thermostat is set to the appropriate temperature. If it is set too high, the compressor will not turn on.
3. Check the compressor overload protector: The overload protector may have tripped, check to see if it is tripped and reset it if necessary.
4. Check the compressor's capacitors: They could be damaged and need replacing.
5. Check the evaporator fan motor: If the evaporator fan motor is not functioning properly, it could cause the compressor not to turn on.
6. Check the 3 in 1 starter: Make sure the 3 in 1 starter is working properly, it could be defective.
7. Check the wiring: Make sure all the wiring is properly connected and not loose.

If you have tried all above steps and the problem persists, it may be best to contact a professional or the manufacturer for further assistance. It could be the compressor, but it's better to confirm that before replacing it, as it's a costly repair.

If the refrigerator or freezer displays error code, request a technician to check, please call the service Different series display different error codes. The error codes for the refrigerator: F1, F2. F3, F4, F5, F6, F7, EO, E1, E2, E6, Er, Ed, an so on The error codes for the wine cellar: F1, F2. F3, F4, F5, H1. H2, A1, A2, E1, E2, EE, HH, LL, and so on Notice: If you power off then power on, maybe the error code disappear, but it will display again after a few hours.

You might have a bad defrost timer

If your 18 cubic foot Haier refrigerator is not getting electricity to the bottom fan, there could be a few different issues causing the problem. Here are a few things you can check:

1. Check the power supply: Make sure the refrigerator is properly plugged in and that the outlet has power.
2. Check the fan: Make sure the fan is not blocked or damaged and that it can turn freely.
3. Check the fan motor: If the fan motor is not working properly, it could cause the fan not to turn on.
4. Check the control board: If the above steps do not resolve the problem, the control board may be faulty and will need to be replaced.
5. Check the wiring: Make sure all the wiring is properly connected and not loose.
6. Check the thermostat: Ensure that the thermostat is set to the appropriate temperature. If it is set too high, the fan will not turn on.
7. Check the compressor: Make sure the compressor is running and not too hot to the touch. If the compressor is not running or is hot, it may be faulty and will need to be replaced.

If you are not familiar with any of these steps or if the problem persists after trying these solutions, it's best to contact the manufacturer or a professional for further assistance.

There should be a thermostat, perhaps it needs adjusting or perhaps it is faulty and should be replaced.

Sounds like the compressor is not working very well the clicking is the compressor starter trying to start the compressor. May be low on freon or bad compressor. You can probaly buy one cheaper than fixing this one

It sounds like your Haier deep freezer is having an issue with the compressor and cooling system. Here are a few things you can check:

1. Check the compressor: Make sure the compressor is running and not too hot to the touch. If the compressor is not running or is hot, it may be faulty and will need to be replaced.
2. Check the compressor's overload protector: The overload protector may have tripped, check to see if it is tripped and reset it if necessary.
3. Check the compressor's capacitors: They could be damaged and need replacing.
4. Check the evaporator fan motor: If the evaporator fan motor is not functioning properly, it could cause the freezer not to freeze.
5. Check the defrost system: If the defrost system is not working properly, the evaporator coils will frost over and the refrigeration will not work.
6. Check the thermostat: Ensure that the thermostat is set to the appropriate temperature. If it is set too low, the freezer will not freeze properly.
7. Check the power supply: Make sure the freezer is properly plugged in and that the outlet has power.
8. Check the clicking sound: If the clicking sound is coming from the compressor, it could be the compressor's relay switch, which is responsible for turning the compressor on and off. This could be the issue and will need to be replaced.

Please note that if a compressor is a sealed unit and you're not able to charge it, it's best to contact the manufacturer or a professional for further assistance.

Reset your Refrigerator Filter Indicator Light Water Filter For Fridge You need to find out the reset procedure for the Haier unit. And change the water filter. How is your French? At least this is a video and you can see what the guy is doing. haier How to reset the filter icon FR

https://www.haieramerica.com/product/HA10TG31SB Click on manual to download it

It is most likely your water valve RF 7800 06 Haier Valve Water Assembly

It depends on the model of your Haier refrigerator. Many newer models of Haier refrigerators have a feature to disable the alarm beep when the doors are left open. To disable the alarm beep, you will need to check the user manual of your refrigerator for specific instructions on how to do this, as the process may vary depending on the model. Here are a few general steps that could help you to disable the alarm beep:

1. Look for a button or switch labeled "alarm" or "door alarm" on the control panel of your refrigerator.
2. Press and hold the button or switch for a few seconds until the alarm stops beeping. This should disable the door alarm.
3. In some models, you can disable it through the settings menu of the control panel, look for the alarm setting and turn it off.
4. Look for the manual of your refrigerator, it should have the information on how to do it.

If you can't find a way to disable the alarm beep, or you are not comfortable with following the instructions, it's best to contact the manufacturer or a professional for further assistance.