Top 20 Stanley Tools Tlm 100 Fatmax Tru - Laser Distance Measurer - 77 - 910 Questions & Answers

0helpful
1answer

Instruction manual for stanleytrulaser TLM100i

http://www.laserstreet.com/documents/TLM100_manual.pdf
10/6/2011 11:02:09 AM • Stanley Tools... • 6,387 views • 0 helpful votes
0helpful
1answer

A rectangular park is 115 m by 95 m.At least how

This is, of course, a trick question. The simple answer is 12, because the circumference of the park is 420m and 12 x 420m is 5040m. However, we are not told how close to the edge the runner is able to run, nor whether he (or she) rounds off the corners. If, for example, the park is bounded by a fence, the runner may have to run 1m inside the fence and will almost certainly not run completely in to each corner. Adjusting for these factors could reduce the distance run per lap to 410m or less, in which case an additional lap will be necessary. In fact, if the actual distance run is less than 416.67m per lap, then 13 laps must be run.
1/11/2010 8:52:02 AM • Stanley Tools... • 78 views • 0 helpful votes
1helpful
1answer

I lost the Stanley TLM100

looking for a copy of tlm100 laser manual
4/14/2009 8:04:00 PM • Stanley Tools... • 961 views • 1 helpful votes
0helpful
1answer

My Stanley fatmax powerit 1000a won't turn on if it's not plugged in

replace battery. Check your manual that came with unit. copy and paste Stanley fat max power it 1000a battery
5/17/2022 5:52:21 PM • Stanley... • 459 views • 0 helpful votes
1helpful
2answers

The USB power will not stay on. Lights up briefly but thats all

I'm having same problem... anyone know?
11/2/2021 10:20:31 AM • Stanley... • 1,926 views • 1 helpful votes
0helpful
1answer

My new Stanley Fatmax Powerit model PP1DCS won’t charge.

TAKE IT BACK TO THE DEALER
8/14/2019 5:51:06 PM • Stanley... • 1,034 views • 0 helpful votes
0helpful
1answer

Stanley Fatmax 1000 Peak Amp Power Station. How do you turn off the backlight please?

Question edited for clarity. The LED Area Light or the Unit display. The backlit display always stays on to alert you to the internal battery status, so that when you come to use it, it should be fully charged. https://www.manualslib.com/manual/2188388/Stanley-Fatmax-Pp1dcs.html?page=2&term=light&selected=1#manual
3/17/2019 11:10:08 AM • Stanley... • 828 views • 0 helpful votes
0helpful
1answer

On Stanley stud finder model 77403 light goes on along with sound all the time button is pushed

Possible low battery.
3/8/2019 5:31:16 PM • Stanley... • 572 views • 0 helpful votes
0helpful
1answer

My wife bought me Xmas 2018 a Stanley Fatmax Lithium ion LED Spotlight FL5W10 600 lumens. The bright portion of the LED has quit working. What are my options - has only been 3 months.

here is the website:https://www.stanleytools.com/products/hand-tools/flashlights-lighting/spotlight/waterproof-led-rechargeable-spotlight/fl5w10and they say the warranty is 1 year:Warranty1 Year Limited WarrantyThe manufacturer, Baccus Global warrants products against defects in materials and workmanship for a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser ("Warranty Period").If there is a defect and a valid claim is received within the Warranty Period, the defective product can be replaced or repaired in the following ways: (1) Return the product to the manufacturer for repair or replacement at manufacturer's option. Proof of purchase may be required by manufacturer. (2) Return the product to the retailer where product was purchased for an exchange (provided that the store is a participating retailer). Returns to retailer should be made within the time period of the retailer's return policy for exchanges only (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges. Please call 1-877-571-2391 for more information or return instructions.This warranty does not apply to accessories, bulbs, fuses and batteries; defects resulting from normal wear and tear, accidents; damages sustained during shipping; alterations; unauthorized use or repair; neglect, misuse, abuse; and failure to follow instructions for care and maintenance for the product.OOtherwise, check with the seller who sold it to your wife - If they are unwilling, and more companies seem to be going this route, go to the Manufacturer
3/4/2019 7:36:31 PM • Stanley... • 470 views • 0 helpful votes
0helpful
1answer

How to get the app to conect my stanley fatmax powerit 1000A to my phone.please help.

I have just read the device instructions and although the device offers usb charging or power up to half an amp it does not and cannot communicate digitally...
2/9/2019 8:31:28 PM • Stanley... • 740 views • 0 helpful votes
1helpful
1answer

Do I plug my stanley fatmax 450 with air compressor to house hold outlet to charge it or what?

Yes. Unless one was provided the standard is to just use an extension cord.
2/11/2019 8:08:14 PM • Stanley... • 343 views • 1 helpful votes
0helpful
1answer

What is the select button used for on the Stanley fat max ?

Stanleyville

10/9/2018 7:43:58 AM • Stanley... • 261 views • 0 helpful votes
0helpful
1answer

How do i recharge Stanley fatmax 700

You will have to buy charger for Stanley fatmax 700 it will cost you around 12$ to15$. You can buy it from any online shopping website like eBay or any other.
6/17/2018 12:40:36 AM • Stanley... • 496 views • 0 helpful votes
0helpful
1answer

What does F01 mean on Stanley Fatmax battery charger mean?

You have a shorted cell in the battery replace it.
5/14/2018 9:12:23 PM • Stanley... • 326 views • 0 helpful votes
0helpful
1answer

Change blade stanley fatmax knife

Watch this video. https://www.youtube.com/watch?v=do8W9t3gRp4
3/9/2018 5:15:37 AM • Stanley... • 1,949 views • 0 helpful votes
9helpful
1answer

Stanley fatmax powerit backlight will not turn off

stanley fatmax jumpstarter 1000A light wont turn off?
11/26/2017 8:01:37 PM • Stanley... • 6,106 views • 9 helpful votes
1helpful
1answer

Stanley stud finder AC sensor continually beeps on 10mm plasterboard wall

Most stud finders have a sensitivity adjustment that should be carefully adjusted per instruction manual before use. Failure to do this results in erroneous indications. If you have adjusted exactly per the instructions with the same result the unit is probably faulty.
9/22/2017 2:47:15 AM • Stanley... • 17,295 views • 1 helpful votes
0helpful
1answer

Need 77-189 stanley pb2 laser fatmax bob plumb instruction manual

Come on. Google is your friend. Also, this has been answered on FixYa before: http://www.fixya.com/support/t8240303-looking_instruction_manual_stanley_fat
10/21/2017 4:53:44 PM • Stanley... • 504 views • 0 helpful votes
Not finding what you are looking for?
Stanley Tools Tlm 100 Fatmax Tru - Laser Distance Measurer - 77 - 910 Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Stanley Measuring Tools & Sensors Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Steve Pack
Steve Pack

Level 3 Expert

7128 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39388 Answers

Are you a Stanley Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Stanley Measuring Tools & Sensors

  • Stanley Measuring Tools & Sensors

Most Popular Question

instruction manual stanleytrulaser

  • Measuring Tools & Sensors
Loading...