Fossil JR8096 Wrist Watch - Answered Questions & Fixed issues
How do I remove the back cover of a Fossil JR-8096 (Big Tic) wristwatch?
when you look at the back are there three small rectangular indents evenly spaced on the edge on the back? If so you'll need a special tool for opening waterproof watches. the tool adjusts to fit the three indents then press down as you turn counterclockwise. you can find the tool on amazon.com or your local jewelry store. make sure the gasket is in place and not damaged before screwing the back on. here is a link to the toolhttp://www.amazon.com/Pavilion-Professional-Waterproof-Adjustments-Caseback/dp/B000K3SK0Y.
If need new glass front??
you can go to fossil.com and they have a repair site for like thirty bucks you can pay to have any parts repaired guess thats what i will have to do to get a replacement band for my own.
I changed the battery in my Fossil ladies watch
mcdevito75 here, Look for a small watcg repir shop in your area. It could be the mechanism is going bad. If you changed the battery for this problem and you have the same problem, then the quartz is ging bad, (the mechanism)
I changed the battery in my Fossil ladies watch
mcdevito75 here, Just had the battery changed, if the watch was running fine before the last battery died, and now with this battery change the watch can"t keep time, try another battery as any Battery can be weak just from storage.
6/15/2010 10:31:15 PM •
Fossil JR8096...
•
Answered
on Jun 15, 2010
•
1,146 views
Big tic no longer changes color
The big tic has two batteries. The battery for the display may need to be changed and the circuit reset. You can then hold the display button down for 2.5 seconds to cycle through the display function.
9/17/2009 6:49:15 PM •
Fossil JR8096...
•
Answered
on Sep 17, 2009
•
1,435 views
Purchased fossil ladies watch am4183
Check the sides of watch band and you will see the pin ends. They are holding all links together. If there are arrows inside the watch band, they are pointing the way the pins must come out.
To shorten the band you have to:
Extract the pins.
Take link(s) off.
Join the rest of band together and drive pins back.
1/2/2009 10:18:20 AM •
Fossil JR8096...
•
Answered
on Jan 02, 2009
•
1,116 views
How do i set the background minutes?
I finally got mine adjusted by pressing the top right button (time) and the "pin" button (bottom left) at the same time. The numbers should start flashing then you can let go of the "pin" button and adjust the time. Hope that helps. Date button works the same way.
3/3/2016 12:42:57 AM •
Fossil JR...
•
Answered
on Mar 03, 2016
•
187 views
Not finding what you are looking for?