Top 20
Yardworks Broadcast Spreader - Page 8 Questions & Answers
Engine dies when u turn on th pto
Likely there's an electrical short to chassis frame. You'll need to isolate the multiple circuits that pass through the PTO switch to identify the offending circuit and test for continuity to battery negative.Wiring diagrams are included in the parts lists from the Bobcat website https://www.bobcatpartsonline.com
4/11/2023 12:45:16 AM •
Garden
•
102 views • 0 helpful votes
Lawnmower engine won't start. No compression
Model number? Engine make/model?
Not likely the rod(s) snapped. If it's an OHV engine, I suspect it kicked a pushrod(s) out of place.
Check for piston movement. Remove spark plugs and put a long screw driver down the plug hole. Manually turn the engine. If the screw driver moves, the connecting rod is intact. Check both cylinders. If piston(s) are moving then likely it's a valve related problem. Remove rocker arm covers and inspect.
5/20/2023 3:52:15 PM •
Garden
•
35 views • 1 helpful votes
Why has Suffolk punch lawnmower drive locked?
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiMk9P78PL-AhUyOn0KHX7HArMQtwJ6BAgOEAI&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DztvPuIm469Q&usg=AOvVaw2qQT3zpfLlrFK_2ltsW6Ko
5/13/2023 3:11:53 PM •
Garden
•
39 views • 0 helpful votes
I have a gt1554yt mower with a 58"deck and to start it ,it just clicks when trying to start it
The most likely causes of the solenoid clicking instead of energizing full are:
- Low battery voltage - Battery needs charging or replacement. Click here for information on charging the battery.
- Loose or corroded connections on cables and wiring that connect the battery to the solenoid and connect the solenoid to the starter. Inspect these connections, remove corrosion and re-establish good electrical contact.
- Loose or corroded connections on the heavy black cables that connect the battery ground circuit to the tractor frame, or damage to the black cable. Inspect these connections, remove corrosion and re-establish good electrical contact.
- Solenoid is not grounded properly to the frame. Check for missing mounting hardware or corrosion that may interfere.
- Faulty solenoid. It can click, but not make a complete connection. Replace solenoid with a new one from Online Parts Store
- Faulty starter or other mechanical problem with the engine.
If the battery is good, and has a full charge, inspect the heavy cables for loose connections, corroded connections, or visible damage that could be interfering with full current flow. Refer to the Operator's Manual for additional information about the battery in your particular tractor.
5/15/2023 5:12:36 PM •
Garden
•
29 views • 0 helpful votes
Not finding what you are looking for?