20 Most Recent Hobart SR24-H Built-in Dishwasher - Page 6 Questions & Answers

Which eeprom and what is your question? The eeprom for the 897545-1 pcb will need to line the little cut out on the pcb with the eeprom. This usually means the pcd goes in upsidedown, with the version of software sticker upsieedown. When you power the machine in, it should count from L9 to L0, then go blank.....Hope this is what you are asking? Remember to power off and remove eeprom after software loaded

By rotating the black rotary switch to the required setting. Cup is setting 1, plates is setting 2, and pots is setting 3. The actual difference between each one is 1= 60 second wash, 2= 90 second and 3= 120 seconds

Most likely wash tank temperature probe faulty

Most likely sump temperature probe needs replacing.

Hobart commercial machines are designed to run with commercial chemicals. There will either be an internal dispenser or an external unit supplied by the chemical supplier. Rinse aid is dispensed directly into the boiler. Detergent to the wash tank. The chemicals used are commercial strength so not required in the same quantity as domestics.

https://www.hobart-export.com/support/documents-download/

On most hobart dishwashers, fil is a fault relating to either the fill solenoid or the water counter in the break tank

Heating element

Hobart are commercial machines so require commercial chemicals. Companies like Johnson diverse and ecolab are the usual favourites, but wherever you buy your cleaning equipment from will have a brand they can sell you. Most companies also provide and setup automatic dispensers with their chemicals. Find a supplier and ask them what they can do for you