20 Most Recent Jura Capresso C1500 Espresso & Coffee Maker - Page 2 Questions & Answers

0answers
0helpful
1answer

My coffee maker says service 8

take a closer look at the answers in this fixya thread :

http://www.fixya.com/support/t224339-jura_capresso_c1500_service_8

I hope this will help you solve the problem

Regards
9/30/2011 11:44:51 AM • Jura Capresso... • Answered on Sep 30, 2011
0answers
0helpful
1answer

My C1500 has started leaking

I'm working on the same problem, I need someone who reads technical swiss-german to help. There is a pump on the bottom right that drives cold water into the boiler. The connector on the bottom of the boiler (brass to vinyl plastic) came apart on mine. On a german language expresso maker website there are several parts that address this problem, the difficulty I'm having is figuring out which part fits tthe boiler I have as apparently this is a problem on serveral version and there have been re-designed connectors (mine doesn't look exactly like the one in the picture
http://www.kaffeemaschinendoctor.de/ReparatursetsWerkzeug/Dicht-/Reparatursets/Jura-Reparatur-Dichtset-fuer-die-Heizpatrone::101.html
7/24/2011 10:21:58 PM • Jura Capresso... • Answered on Jul 24, 2011
0helpful
2answers

How to reset machine when filter is changed

Click on the link below to contact Jura and they can provide you with the owners manual and instructions on how to reset your C1500 espresso and coffee machine:

http://www.capresso.com/cust_mail.html


CUSTOMER SERVICE 1-800-767-3554
Monday through Friday from 9:00 am to 9:00 pm E.S.T. and Saturday 9:00 am to 5:00 pm E.S.T.

P.O. Box 775, 81 Ruckman Road, Closter, NJ 07624
Phone : (800)767-3554, Fax : (201)-767-9684
email :
[email protected]

1/17/2011 9:20:56 AM • Jura Capresso... • Answered on Jan 17, 2011
0helpful
2answers

Water does not come out the frother/hot water spout .

check your solenoid valve and security valve of boiler of the machine. make sure they are clean and work good, than you will have perfect espresso again.
if pump runs without your comand check up the swich of brewing coffee.
4/23/2010 7:43:52 PM • Jura Capresso... • Answered on Apr 23, 2010
0helpful
1answer

Hi my coffee machine gives me error service 8. Can

If you are still out there looking I posted a solution to this elsewhere on the site. Good luck!
4/23/2010 7:35:33 PM • Jura Capresso... • Answered on Apr 23, 2010
0helpful
2answers

Capresso C1500

I have tis same trouble now no water at all I need help fast
Steve
3/31/2010 6:53:47 PM • Jura Capresso... • Answered on Mar 31, 2010
0helpful
1answer

It leaks clear water underneath on right side

Hi, wondering if you found the solution, my S9 is doing the same thing. Thanks
3/30/2010 3:14:32 AM • Jura Capresso... • Answered on Mar 30, 2010
0helpful
1answer

One over tired morning I picked up a bag of choc.

I recommend that you call Capresso and ask how much it will cost you. If there`s nothing else wrong with your machine it will always pay to repair instead of buying a new one
8/4/2009 9:31:56 AM • Jura Capresso... • Answered on Aug 04, 2009
0helpful
1answer

Espresso C15---weak coffee

Basing on personal experience (you can find more on Google probably), solutions are:

On percolated (filter) coffee machines:

Check water temp, if water temp is insufficient , most common is scale heating element , faulty element, faulty thermostat.
Check if water is dripping right at the center of the filter, if it is dripping on one side because the orifice is clogged, that can result in weak coffee.
Coffee blend not well distributed on filter basket.

On Espresso machines:

Check water temp, same as filter coffee machines (thermostat element, scale on heating chamber).
Ensure that coffee is filled correctly in the filter cup (fill at level), and well pressed.
Ensure that the coffee mixture that you are using is not too coarse, buy the apposite one for espresso.
Ensure that you are not leaving the machine brewing for a time that is too long, and Italian coffee cup is very small, approximately one regular shot.

On the hob moka pots (espresso, Moka and Bialetti type):

This are the trickiest ones, you need art and practice to get a good espresso with a Moka, but when you learn, the result is better than what you may get with an home electrical espresso maker.
The frame on the hob must be not too strong, and the mixture coarse but well pressed, with water at level tag, or you will get a weak coffee.
On Mokas a good strategy is keeping hob at minimum, and turning up the flame at top when coffee starts coming out.

French and turkish cafetieres:

Ensure that you put enough coffee, water hot enough, and that you left the infusion enough time to get a strong coffee.

Note: insufficient pressure and clogged lines on electric machines never give you a weak coffee, exactly the opposite.
Not pressed mixture always gives weak coffee, but too much pressed mixture may give you coffee with bad taste.
4/1/2009 2:53:22 PM • Jura Capresso... • Answered on Apr 01, 2009
0helpful
1answer

Can't get any water to come out of hot water or steam dispenser

Have you ever tried to reset the machine? You can try to unplug the power cable of the unit for few minutes (10-20) then plug it back in. Hold the power button for about 5 seconds. Check if that clears the error.
12/3/2008 3:18:43 AM • Jura Capresso... • Answered on Dec 03, 2008
0helpful
1answer

Capresso C 3000 order of water lines for dispensers

Unfortunately, without being there in person to inspect the machine and its components, it's difficult for me to provide a definitive answer. However, I can offer some general guidance that may help:
  1. Consult the user manual: The user manual for your Capresso C3000 should have a diagram or schematic showing the different components and their connections. If you still have the manual, check to see if there's a helpful diagram inside.
  2. Look for visual cues: While it can be difficult to identify the tubes by sight alone, there may be visual cues that can help you narrow down which tubes go where. For example, one tube may be thicker or more flexible than the others, or it may have a different color or texture.
  3. Experiment with different configurations: If you're unable to find a diagram or visual cues, you may need to experiment with different configurations until you find the correct one. This can be time-consuming and frustrating, but it may be the only option if you're unable to find any other information.
  4. Seek professional help: If you're still unable to identify the correct tube configuration, you may want to consider seeking professional help. A qualified technician or repair service may be able to identify the correct configuration and get your machine back up and running.
I hope this helps, and I wish you the best of luck in getting your Capresso C3000 back in working order!
2/26/2023 6:08:40 AM • Jura Capresso... • Answered on Feb 26, 2023
Not finding what you are looking for?
Jura Capresso C1500 Espresso & Coffee Maker Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Sulejman Sulejmani
Sulejman Sulejmani

Level 2 Expert

138 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jura Capresso Coffee Makers & Espresso...

  • Jura Capresso Coffee Makers & Espresso...

Most Popular Question

c5 machine stuck

  • Coffee Makers & Espresso Machines
Loading...