Jura Capresso Impressa Z5 Espresso/Coffee Maker - Answered Questions & Fixed issues


I am experiencing the same problem, so any assistance welcome..

Jura Capresso... | Answered on Aug 13, 2016 | 502 views


RB5193 wrote: If the machine keeps saying EMPTY GROUNDS even though you have, pull out the tray, look just inside the aparture where the tray goes top right at the front there is a small slot where if you look closely you can see a small white micro switch.

finally found it - look inside the large opening where the entire tray part fits - all the way up front - just inside the opening, not in the back where the contacts fit, but way in front - there resides the white micro switch - loosen it up and voila! It works (after 4 hours of hunting, scraping, filing etc - it works like a charm - photo attached, I hope. Thank you RB5193!

a4b2b552-6a5f-424b-a151-bc7786112477.jpeg

Jura Capresso... | Answered on Mar 27, 2016 | 1,088 views


first check the grounds tray as it must go in with the side-tabs (small ridge on each side) in the rear, otherwise it will not seat properly. If that doesn't work give me a shout. gl.

Jura Capresso... | Answered on Jun 08, 2015 | 251 views


foreign element perhaps the grinder is bad though. First try using a small vacuum that will allow adequate control of vacumming up the bean container. remove all the beans etc. the bean container must be emptied. then look at what the vacuum removed, any foreign objects? if you see 1 or more it's likely fixed. otherwise remove any inside cover/guides in the bean container you should now look directly at the grinder wheels with flashlight, as there may instead be a foreign substance or a defect preventing the grinder from processing the beans. if a defect then it may require factory service. gl

Jura Capresso... | Answered on Jun 08, 2015 | 255 views


Check the main switch is on.. rear bottom left corner..
If still won't turn on, check the fuse in the plug.

Jura Capresso... | Answered on Jun 01, 2015 | 315 views


seems I read a lot about descaling . having never owned one I would try that

Jura Capresso... | Answered on May 27, 2015 | 76 views


Most likely it is a sensor error. you can try to clean the inner parts by removing the tray and carefully with a moist towel wipe the parts gently. If you have a mirror on a stick that's helpful. You may have no other visible choice than to contact Jura Capresso and pay for servicing the unit if memory serves it ran about $250. M

Jura Capresso... | Answered on May 21, 2015 | 72 views


Either the funnel flap is damaged, or the microswitch that the funnel works with.

Jura Capresso... | Answered on Apr 20, 2015 | 135 views


Hi, I made a video how to fix your Jura step by step, good luck.!
http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Jura Capresso... | Answered on Mar 23, 2015 | 1,526 views


Hi, I made a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Jura Capresso... | Answered on Mar 23, 2015 | 355 views


Hi, a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Jura Capresso... | Answered on Mar 23, 2015 | 88 views


Hi, how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Jura Capresso... | Answered on Mar 23, 2015 | 598 views


Hi, I made a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Jura Capresso... | Answered on Mar 23, 2015 | 1,415 views


Hi, I made some videos how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Jura Capresso... | Answered on Mar 23, 2015 | 717 views


Check your manual
The rear often has a trouble guide

MANUALS & Instruction Books are On Line
The Books & Manuals are more than likely on the manufacturers site. Often as downloadable PDF files

Search their support area for your specific model of device.
Try Google Search for a Manual or PDF File for the specific brand & model number.
Also check these Sites:
www.retrevo.com .... Manuals
www.office.manualsonline.com

Jura Capresso... | Answered on Aug 07, 2017 | 590 views


There are severial videos on uTube that show how to resolve problems. I have included a link that will probably help you.

How to Fix Jura Z5 Z6 and Z7 Jura Z5 Z6 Z7 Disassembly Instructions

Jura Capresso... | Answered on Jun 16, 2016 | 678 views


There are two heaters in the Z5.. one for coffee, one for steam.
Sounds like you have a fault with the steam heater.

Jura Capresso... | Answered on Dec 22, 2014 | 187 views


turn knob to auto

Jura Capresso... | Answered on Apr 22, 2017 | 479 views


My guess would be that your water tank float is trapped.
The remidy would be to descale the watertank itself.
If you use the Calris filter cartridge. remove it before descaling with a mild commercially available descaler. Don't forget to rinse thorrowly afterwards and reinsert the filter. Always use cold water to fill the watertank.
Hope this helps

Jura Capresso... | Answered on Oct 06, 2014 | 917 views

Not finding what you are looking for?
Jura Capresso Impressa Z5 Espresso/Coffee Maker Logo

225 questions posted

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

76054 Answers

markybean

Level 1 Expert

40 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...